Skip to content
Engineering Bible

Results appear as you type. Use the arrow keys to move through them and Enter to open one.

Popular

↑ ↓ moveEnter openEsc close

IPE beam sizes and properties

IPE sections are the European parallel-flange I-beams, the standard choice for beams in steel frames across Europe. The number is the height in millimetres: an IPE 300 is 300 mm high with a 150 mm flange and weighs 42.2 kg/m. The table gives the dimensions to EN 10365 and the section properties used in EN 1993-1-1 design, about the strong axis.

Free to reuse under CC BY 4.0 with a link to this page. Each table downloads as a CSV file.

To compute any value directly: Steel beam size calculator

IPE sections, EN 10365

SectionMass (kg/m)h (mm)b (mm)tw (mm)tf (mm)r (mm)A (cm²)Iy (cm⁴)Wel,y (cm³)Wpl,y (cm³)Avz (cm²)
IPE 80680463.85.257.64802023.23.57
IPE 1008.1100554.15.7710.3217134.239.45.08
IPE 12010.4120644.46.3713.213185360.76.31
IPE 14012.9140734.76.9716.4354177.388.37.65
IPE 16015.81608257.4920.09869108.7123.99.66
IPE 18018.8180915.38923.951 317146.3166.411.25
IPE 20022.42001005.68.51228.481 943194.3220.614
IPE 22026.22201105.99.21233.372 772252285.415.88
IPE 24030.72401206.29.81539.123 892324.3366.719.15
IPE 27036.12701356.610.21545.955 790428.948422.14
IPE 30042.23001507.110.71553.818 356557.1628.425.68
IPE 33049.13301607.511.51862.6111 767713.2804.330.81
IPE 36057.1360170812.71872.7316 266903.71 019.235.14
IPE 40066.34001808.613.52184.4723 1281 156.41 307.242.7
IPE 45077.64501909.414.62198.8233 7431 499.71 701.850.84
IPE 50090.750020010.21621115.5248 1991 9282 194.259.87
IPE 550105.555021011.117.224134.4267 1172 440.62 787.172.35
IPE 600122.5600220121924155.9992 0833 069.43 512.583.79

Download this table as CSV

How the table was made

Dimensions from EN 10365; properties from the ArcelorMittal Sections and Merchant Bars catalogue. A_vz is the shear area for a load parallel to the web, A − 2 b t_f + (t_w + 2 r) t_f, from EN 1993-1-1 6.2.6(3)a.

FAQ

How much does an IPE 200 weigh?
22.4 kg per metre.

Is IPE the same as an American W-shape?
No. IPE flanges are narrower and of constant thickness, and the sizes are metric. HEA and HEB are the European wide-flange series.

  • Steel beam size calculator: Lightest W-shape (AISC 360, ASD or LRFD) or IPE beam (Eurocode 3) for a simply supported span: bending, shear and live-load deflection with self-weight.
  • Beam deflection and bending stress: Maximum bending moment, bending stress, deflection and reactions for simply supported, cantilever and fixed beams with standard sections.
  • Moment of inertia calculator (section properties): Area moment of inertia, section modulus, plastic modulus, centroid and radius of gyration of rectangles, tubes, I-beams, T and channel sections.
  • Steel and metal weight calculator: Weight of steel, stainless, aluminium, copper and brass plate, bar, tube, pipe, angle, beam and channel, per metre or foot, per piece and in total.

Sources

  • EN 10365:2017, Hot rolled steel channels, I and H sections: dimensions and masses.
  • ArcelorMittal, Sections and Merchant Bars, sales programme.
  • EN 1993-1-1:2005, clause 6.2.6.

Results are estimates. They do not replace the governing code, class or flag requirements, or a check by a competent person. Report a problem