Engineering guides
Each guide explains one method from start to finish: what it is for, the formulas, a worked example with real numbers, and the mistakes that catch people out. Every number can be reproduced with the calculator it links to.
Maritime
- 13 min readCargo securing calculation to CSS Code Annex 13Work out the design forces on a lashed cargo unit and check sliding and tipping by the IMO CSS Code Annex 13 advanced method, step by step.
- 12 min readHow to do a draft survey calculation, step by stepCarry out a draft survey by hand, from six draft readings through the trim and density corrections to the constant and the cargo figure.
- 12 min readHow EU ETS and FuelEU Maritime costs are calculatedCalculate the EU ETS allowance cost and the FuelEU Maritime compliance balance and penalty for a voyage or a year, step by step.
- 11 min readHow to calculate a ship's CII rating, step by stepWork out a ship's attained and required CII and its A to E rating by hand, with the IMO reference lines, reduction factors and rating boundaries.
- 12 min readHull and propeller performance in service with ISO 19030Correct in-service speed and power data, fit the speed–power curve, read speed loss and power increase, and price fouling into a cleaning interval.
- 11 min readShip resistance and powering: from hull to installed powerEstimate a ship's calm-water resistance with Holtrop–Mennen and turn it into shaft power and an engine rating with the propulsive efficiencies and margins.
- 13 min readHow to calculate ship squat and under-keel clearanceEstimate squat with the Barrass formulas, build an under-keel clearance budget from depth, tide and draft, and find the speed that keeps your margin.
- 13 min readShip stability explained: GM, the GZ curve and IMO criteriaWork out a ship's GM with free surface, the list from a weight shift and the rolling period, then check the GZ curve against the IMO intact stability criteria.
Electrical
Fluids and pumps
Civil
General
How the guides are written
The guides follow the same rule as the calculators: a number is only shown with its formula, its assumptions and its source. The worked examples are run through the site's own calculators, which must reproduce a set of known answers before every release. How the numbers are checked.
If a guide disagrees with a standard, a rule or your own notes, please write to contact@engineeringbible.com with the passage and the source. Corrections are made quickly and gladly.