Process and chemical calculators
Concentrations, solutions, fluid properties and plant balances for chemical, water-treatment and oil and gas work: each calculator states its equation, its data source and the range where it holds.
12 calculators · Formula sheet · Glossary · Practice problems- Blending ratio calculator (two liquids to a target property)Fractions and volumes of two liquids to blend to a target concentration, density, sulphur content or viscosity (Refutas), by mass or by volume.
- Chemical dosing calculator (feed rate, pump setting, chlorine dose)Chemical feed rate and dosing pump setting in L/h and gal/day from flow, dose in mg/L, product strength and density, with chlorine dose, demand and residual.
- Density calculator (mass, volume and density)Density, mass or volume from the other two, with reference densities of water, solvents, fuels, gases, metals, timber, concrete and glass.
- Dilution calculator (C1V1 = C2V2 and serial dilution)Solve C1V1 = C2V2 for any one term, with the dilution factor, diluent volume and ratio, plus serial dilution steps and their concentrations.
- Distillation stages calculator (Fenske–Underwood–Gilliland)Minimum stages (Fenske), minimum reflux (Underwood), theoretical stages at a reflux ratio (Gilliland, Molokanov) and feed stage (Kirkbride) of a binary column.
- Gas compressibility factor Z calculator (natural gas and pure gases)Real-gas Z factor and density of natural gas by Sutton and Dranchuk–Abou-Kassem (Standing–Katz), with Wichert–Aziz, or of a pure gas from Tc, Pc and ω.
- Mass balance calculator: mixing streams (flow, concentration, temperature)Mix two or three streams to find the combined flow, concentration and temperature, or find the stream 2 flow that reaches a target concentration or temperature.
- Mass flow rate calculator (kg/h, m³/h, velocity, Nm³/h, SCFM)Mass flow, volume flow and pipe velocity from any one of them, with gas density from P, T and Z and conversion between actual and standard flow (Nm³/h, SCFM).
- Molarity calculator (moles, mass, volume, normality)Molarity, mass of solute or volume of solution from the other two, with molar masses of common reagents, moles, normality, molality and % w/w.
- PPM concentration converter (mg/L, % w/w, ppmv, mg/m³, mol/L)Convert ppm and ppb by mass or volume, mg/L, g/L, % w/w, mol/L and mg/m³ for liquids and gases, using the density, molar mass, temperature and pressure.
- Specific gravity calculator (SG, API gravity, Baumé)Specific gravity of liquids from density, API gravity or Baumé degrees, and of gases from the molar mass, with density in kg/m³, lb/ft³ and lb/gal.
- Vapour pressure calculator (Antoine equation)Vapour pressure at a temperature, or boiling point at a pressure, of water, alcohols, acetone, aromatics, alkanes, ammonia and more by the Antoine equation.