Skip to content
Engineering Bible

Results appear as you type. Use the arrow keys to move through them and Enter to open one.

Popular

↑ ↓ moveEnter openEsc close

Marine fuel emission factors (Cf, LCV, well-to-wake)

Every CO₂ figure for a ship starts from a conversion factor: the tonnes of CO₂ released by burning a tonne of fuel. IMO uses Cf from the EEDI guidelines for CII and the IMO DCS; the EU uses its own default factors for FuelEU Maritime and the ETS, which add the well-to-tank emissions and methane and nitrous oxide. Heavy fuel oil has Cf = 3.114 t CO₂ per tonne.

Regulatory figures checked on ; next review due by .

Free to reuse under CC BY 4.0 with a link to this page. Each table downloads as a CSV file.

To compute any value directly: Fuel net specific energy and CO₂ factor

IMO CO₂ conversion factors Cf (MEPC.364(79))

FuelCf (t CO₂ / t fuel)
HFO3.114
VLSFO / LFO3.151
MGO / MDO3.206
LNG2.750
LPG propane3.000
LPG butane3.030
Methanol1.375
Ethanol1.913

Download this table as CSV

FuelEU Maritime default values (Annex II)

FuelLCV (MJ/kg)WtT (g CO₂e/MJ)CO₂ (g/g)CH₄ (g/g)N₂O (g/g)Slip (%)WtW (g CO₂e/MJ)
HFO (ISO 8217 RME–RMK)40.513.53.1140.000050.000180.091.74
LFO / VLSFO (RMA–RMD)41.013.23.1510.000050.000180.091.39
MDO / MGO (DMX–DMB)42.714.43.2060.000050.000180.090.77
LNG — Otto dual-fuel medium speed (slip 3.1 %)49.118.52.7500.000000.000113.189.20
LNG — Otto dual-fuel slow speed (slip 1.7 %)49.118.52.7500.000000.000111.782.87
LNG — Diesel dual-fuel slow speed (slip 0.2 %)49.118.52.7500.000000.000110.276.08
LNG — lean-burn spark ignition (slip 2.6 %)49.118.52.7500.000000.000112.686.94
LPG propane46.07.83.0000.000000.000000.073.02
LPG butane46.07.83.0300.000000.000000.073.67
Methanol from natural gas19.931.31.3750.000000.000000.0100.40

Download this table as CSV

How the table was made

Cf values are those of the IMO 2022 EEDI calculation guidelines, MEPC.364(79) Table 1, used by the CII and fuel CO₂ calculators. FuelEU default values are from Regulation (EU) 2023/1805 Annex II as used by the EU ETS and FuelEU calculator; the well-to-wake intensity combines them with the FuelEU global warming potentials (CH₄ 25, N₂O 298).

Where a bunker delivery note or a certificate gives a fuel’s own LCV or emission factors, those replace the defaults for FuelEU. LPG and fossil methanol have no default CH₄ and N₂O factors yet, so they are taken as zero.

FAQ

What is the CO₂ factor for MGO?
3.206 t CO₂ per tonne of fuel (Cf, MEPC.364(79)).

Why are the IMO and EU figures for CO₂ the same but the totals different?
Both use the same tank-to-wake CO₂ per tonne. The EU adds the well-to-tank emissions of producing the fuel and the effect of methane and nitrous oxide, so its well-to-wake figure is higher.

  • Fuel net specific energy and CO₂ factor: ISO 8217 net and gross specific energy from density, water, ash and sulphur; CO₂ factor by IMO grade or carbon content; g CO₂/MJ.
  • EU ETS and FuelEU Maritime: EU ETS allowances and cost with phase-in and voyage scope; FuelEU Maritime GHG intensity against the yearly limit, compliance balance and penalty.
  • CII rating estimator: Attained and required operational CII with the A–E rating, from ship type, capacity, annual fuel or CO₂ and distance.

Sources

  • IMO Resolution MEPC.364(79), 2022 Guidelines on the method of calculation of the attained EEDI, Table 1.
  • Regulation (EU) 2023/1805 (FuelEU Maritime), Annexes I and II.

Results are estimates. They do not replace the governing code, class or flag requirements, or a check by a competent person. Report a problem