Resistors and capacitors are made in preferred values, the E-series of IEC 60063. Each series divides a decade into equal ratios: E12 has 12 values per decade for 10 % parts, E24 has 24 for 5 %, and E96 has 96 for 1 % parts. Multiply a value by any power of ten: 4.7 gives 4.7 Ω, 47 Ω, 470 Ω, 4.7 kΩ and so on.
Free to reuse under CC BY 4.0 with a link to this page. Each table downloads as a CSV file.
Values from IEC 60063:2015, Tables 1 and 2. Some E24 values (2.7 to 4.7 and 8.2) do not follow the geometric series exactly; they are the historical values the standard keeps.
FAQ
Why are resistor values like 4.7 and 6.8? The values are spaced geometrically, so each is about the same percentage above the last: in E6 each step is ×1.47. With 20 % tolerance the ranges of neighbouring values just meet.
Is 5 kΩ a standard value? Not in E12 or E24: the nearest are 4.7 kΩ and 5.1 kΩ (E24). E96 has 4.99 kΩ.
Calculators that use this table
Resistor colour code: Resistance, tolerance and temperature coefficient from the colour bands of a 4, 5 or 6-band resistor, and the colour bands for any value.
Series and parallel resistors: Equivalent resistance of any number of resistors in series and in parallel, how the voltage or current divides, and the totals at a given voltage.
Voltage divider: Output voltage of a two-resistor divider, or the R2 for a target voltage with the nearest E24 or E96 value, plus current, power and the effect of a load.
LED series resistor: Series resistor for an LED or a string of LEDs: exact value, next standard value, actual current, resistor power and the rating to buy.
Sources
IEC 60063:2015, Preferred number series for resistors and capacitors.
Results are estimates. They do not replace the governing code, class or flag requirements, or a check by a competent person. Report a problem