Metric thickness (kg/m²)
| t (mm) | Carbon steel | Stainless 304 | Aluminium | Carbon steel (lb/ft²) |
|---|---|---|---|---|
| 1 | 7.85 | 7.90 | 2.70 | 1.61 |
| 1.5 | 11.78 | 11.85 | 4.05 | 2.41 |
| 2 | 15.70 | 15.80 | 5.40 | 3.22 |
| 2.5 | 19.63 | 19.75 | 6.75 | 4.02 |
| 3 | 23.55 | 23.70 | 8.10 | 4.82 |
| 4 | 31.40 | 31.60 | 10.80 | 6.43 |
| 5 | 39.25 | 39.50 | 13.50 | 8.04 |
| 6 | 47.10 | 47.40 | 16.20 | 9.65 |
| 8 | 62.80 | 63.20 | 21.60 | 12.86 |
| 10 | 78.50 | 79.00 | 27.00 | 16.08 |
| 12 | 94.20 | 94.80 | 32.40 | 19.29 |
| 15 | 117.75 | 118.50 | 40.50 | 24.12 |
| 20 | 157.00 | 158.00 | 54.00 | 32.16 |
| 25 | 196.25 | 197.50 | 67.50 | 40.20 |
| 30 | 235.50 | 237.00 | 81.00 | 48.23 |
| 40 | 314.00 | 316.00 | 108.00 | 64.31 |
| 50 | 392.50 | 395.00 | 135.00 | 80.39 |
Gauge and inch thickness (lb/ft²)
| Thickness | Carbon steel | Stainless 304 | Aluminium | Carbon steel (kg/m²) |
|---|---|---|---|---|
| 16 ga (0.0598 in) | 2.44 | 2.46 | 0.84 | 11.9 |
| 14 ga (0.0747 in) | 3.05 | 3.07 | 1.05 | 14.9 |
| 12 ga (0.1046 in) | 4.27 | 4.30 | 1.47 | 20.9 |
| 10 ga (0.1345 in) | 5.49 | 5.53 | 1.89 | 26.8 |
| 3/16 in | 7.66 | 7.71 | 2.63 | 37.4 |
| 1/4 in | 10.21 | 10.27 | 3.51 | 49.8 |
| 5/16 in | 12.76 | 12.84 | 4.39 | 62.3 |
| 3/8 in | 15.31 | 15.41 | 5.27 | 74.8 |
| 1/2 in | 20.42 | 20.55 | 7.02 | 99.7 |
| 5/8 in | 25.52 | 25.69 | 8.78 | 124.6 |
| 3/4 in | 30.63 | 30.82 | 10.53 | 149.5 |
| 1 in | 40.84 | 41.10 | 14.05 | 199.4 |
| 1 1/4 in | 51.05 | 51.37 | 17.56 | 249.2 |
| 1 1/2 in | 61.26 | 61.65 | 21.07 | 299.1 |
| 2 in | 81.68 | 82.20 | 28.09 | 398.8 |
How the table was made
Each value is the metal weight calculator’s result for a 1 m × 1 m plate: carbon steel 7 850 kg/m³ (EN 1993-1-1), stainless 304 7 900 kg/m³ (EN 10088-1), aluminium 2 700 kg/m³. Gauge thicknesses are the manufacturers’ standard gauge for steel sheet.
Mill tolerances allow plate to be thicker than nominal, so a weighed plate is often 2 to 5 % heavier than the table. Aluminium gauges are thinner than steel gauges of the same number; the inch rows use the steel gauge thickness for all three metals.
FAQ
How much does a 10 mm steel plate weigh per square metre?
78.5 kg/m².
How much does 1/4 in steel plate weigh?
10.2 lb per square foot.
Calculators that use this table
- Steel and metal weight calculator: Weight of steel, stainless, aluminium, copper and brass plate, bar, tube, pipe, angle, beam and channel, per metre or foot, per piece and in total.
- Density calculator (mass, volume and density): Density, mass or volume from the other two, with reference densities of water, solvents, fuels, gases, metals, timber, concrete and glass.
- Rebar weight and quantity calculator: Rebar weight per foot or metre for US #3–#18 and metric bars, and the number, length and weight of bars in a slab grid at any spacing.
Sources
- EN 1993-1-1:2005, clause 3.2.6 (steel density).
- EN 10088-1:2014, Stainless steels (density).
- Manufacturers’ standard gauge for sheet steel.