Skip to content
Engineering Bible

Results appear as you type. Use the arrow keys to move through them and Enter to open one.

Popular

↑ ↓ moveEnter openEsc close

W beam sizes and properties (wide-flange)

W-shapes are the wide-flange I-beams of American steel construction. The designation gives the nominal depth in inches and the weight in pounds per foot: a W12×26 is about 12 in deep and weighs 26 lb/ft. The table lists the lighter shapes of each depth from W6 to W24, the ones most often chosen for floor beams and lintels, with the properties used for bending design.

Free to reuse under CC BY 4.0 with a link to this page. Each table downloads as a CSV file.

To compute any value directly: Steel beam size calculator

Selected W-shapes, AISC Shapes Database v16.0

ShapeWeight (lb/ft)A (in²)d (in)bf (in)tw (in)tf (in)Ix (in⁴)Sx (in³)Zx (in³)
W6×992.685.93.940.170.21516.45.566.23
W6×12123.556.0340.230.2822.17.318.3
W6×16164.746.284.030.260.40532.110.211.7
W8×10102.967.893.940.170.20530.87.818.87
W8×13133.847.9940.230.25539.69.9111.4
W8×15154.448.114.020.2450.3154811.813.6
W8×18185.268.145.250.230.3361.915.217
W8×21216.168.285.270.250.475.318.220.4
W8×24247.087.936.50.2450.482.720.923.1
W8×28288.258.066.540.2850.4659824.327.2
W8×31319.13880.2850.43511027.530.4
W10×12123.549.873.960.190.2153.810.912.6
W10×15154.419.9940.230.2768.913.816
W10×17174.9910.14.010.240.3381.916.218.7
W10×19195.6210.24.020.250.39596.318.821.6
W10×22226.4910.25.750.240.3611823.226
W10×26267.6110.35.770.260.4414427.931.3
W10×30308.8410.55.810.30.5117032.436.6
W10×33339.719.737.960.290.4351713538.8
W12×14144.1611.93.970.20.22588.614.917.4
W12×16164.71123.990.220.26510317.120.1
W12×19195.5712.24.010.2350.3513021.324.7
W12×22226.4812.34.030.260.42515625.429.3
W12×26267.6512.26.490.230.3820433.437.2
W12×30308.7912.36.520.260.4423838.643.1
W12×353510.312.56.560.30.5228545.651.2
W12×404011.711.98.010.2950.51530751.557
W14×22226.4913.750.230.3351992933.2
W14×26267.6913.95.030.2550.4224535.340.2
W14×30308.8513.86.730.270.3852914247.3
W14×343410146.750.2850.45534048.654.6
W14×383811.214.16.770.310.51538554.661.5
W14×434312.613.780.3050.5342862.669.6
W14×484814.113.88.030.340.59548470.278.4
W16×26267.6815.75.50.250.34530138.444.2
W16×31319.1315.95.530.2750.4437547.254
W16×363610.615.96.990.2950.4344856.564
W16×404011.81670.3050.50551864.773
W16×454513.316.17.040.3450.56558672.782.3
W16×505014.716.37.070.380.636598192
W18×353510.317.760.30.42551057.666.5
W18×404011.817.96.020.3150.52561268.478.4
W18×464613.518.16.060.360.60571278.890.7
W18×505014.7187.50.3550.5780088.9101
W18×555516.218.17.530.390.6389098.3112
W18×606017.618.27.560.4150.695984108123
W21×44441320.76.50.350.4584381.695.4
W21×505014.720.86.530.380.53598494.5110
W21×575716.721.16.560.4050.651170111129
W21×626218.3218.240.40.6151330127144
W21×68682021.18.270.430.6851480140160
W24×555516.223.67.010.3950.5051350114134
W24×626218.223.77.040.430.591550131153
W24×686820.123.78.970.4150.5851830154177
W24×767622.423.98.990.440.682100176200
W24×848424.724.19.020.470.772370196224

Download this table as CSV

How the table was made

Values from the AISC Shapes Database v16.0 (August 2023). I_x, S_x and Z_x are about the strong axis. This is a selection; the full database lists every rolled W-shape up to W44.

For a quick check of which shape carries a load, the steel beam size calculator runs the AISC 360 flexure, shear and deflection checks over this list.

FAQ

What does W8×10 mean?
A wide-flange shape about 8 in deep weighing 10 lb per foot. Its actual depth is 7.89 in.

What is the difference between S_x and Z_x?
S_x is the elastic section modulus, for the moment at first yield; Z_x is the plastic modulus, for the full plastic moment that AISC uses for compact shapes.

  • Steel beam size calculator: Lightest W-shape (AISC 360, ASD or LRFD) or IPE beam (Eurocode 3) for a simply supported span: bending, shear and live-load deflection with self-weight.
  • Beam deflection and bending stress: Maximum bending moment, bending stress, deflection and reactions for simply supported, cantilever and fixed beams with standard sections.
  • Moment of inertia calculator (section properties): Area moment of inertia, section modulus, plastic modulus, centroid and radius of gyration of rectangles, tubes, I-beams, T and channel sections.
  • Steel and metal weight calculator: Weight of steel, stainless, aluminium, copper and brass plate, bar, tube, pipe, angle, beam and channel, per metre or foot, per piece and in total.

Sources

  • AISC Shapes Database v16.0, August 2023.
  • ANSI/AISC 360-22, Specification for Structural Steel Buildings.

Results are estimates. They do not replace the governing code, class or flag requirements, or a check by a competent person. Report a problem