Structural engineering practice problems
10 multiple-choice problems in the style of the FE and PE engineering exams. Pick an answer to check it, then open the worked solution. Every answer is recomputed by the structural calculator that solves it, and the solution opens that calculator with the problem's numbers filled in.
-
Midspan deflection of a simply supported steel beam
A simply supported steel floor beam spans 6 m and carries a uniformly distributed load of 18 kN/m. The section is an IPE 300 with I = 8356 cm⁴, and E = 210 GPa. What is the maximum deflection at midspan?
Show the answer and worked solution
Answer: B, 17.3 mm
- Simply supported beam under a uniform load: δ = 5 w L⁴ / (384 E I).
- δ = 5 × 18 000 × 6⁴ / (384 × 210 × 10⁹ × 8356 × 10⁻⁸) = 0.0173 m = 17.3 mm, about L/347.
- The traps: 3.5 mm uses the fixed-end formula w L⁴/(384 E I), 27.7 mm lumps the whole 108 kN at midspan (P L³/48 E I), and 166.2 mm uses the cantilever formula w L⁴/(8 E I).
Check every step: Beam deflection and bending stress, opened with this problem’s numbers
-
Elastic buckling load of a pinned welded I-section column
A welded I-section column is 200 mm deep with two 200 × 15 mm flanges and a 9 mm web. It is 8 m long, pinned at both ends and not braced about either axis. The steel is S355 with E = 210 GPa and a yield strength of 355 MPa. What is the elastic critical buckling load?
Show the answer and worked solution
Answer: A, 648 kN
- Area: A = 2 × 200 × 15 + 170 × 9 = 7530 mm².
- Minor axis: Iy = 2 × 15 × 200³/12 + 170 × 9³/12 = 2.001 × 10⁷ mm⁴, so ry = √(Iy/A) = 51.5 mm.
- Slenderness: K L / r = 1.0 × 8000 / 51.5 = 155, above the transition value π √(2E/σy) = 108, so the Euler formula applies.
- Euler load: Pcr = π² E Iy / (K L)² = π² × 210 000 × 2.001 × 10⁷ / 8000² = 648 kN.
- The traps: 1790 kN uses the major axis Ix = 5.51 × 10⁷ mm⁴, 2670 kN is the squash load A σy, and 162 kN uses K = 2 (a flagpole) for pinned ends.
Check every step: Column buckling (Euler and Johnson), opened with this problem’s numbers
-
Fillet weld throat for a lap joint (EN 1993-1-8 simplified method)
A lap joint in S275 steel (fu = 430 MPa, βw = 0.85) is made with two longitudinal fillet welds, each with a 150 mm effective length. The joint carries a design shear force of 280 kN along the weld axes. Using the EN 1993-1-8 simplified method with γM2 = 1.25, what minimum throat thickness a is required?
Show the answer and worked solution
Answer: C, 3.99 mm
- Weld design strength: f_vw,d = fu / (√3 βw γM2) = 430 / (√3 × 0.85 × 1.25) = 233.7 MPa.
- Force per unit length: F_w,Ed = 280 000 / (2 × 150) = 933 N/mm.
- Throat: a = F_w,Ed / f_vw,d = 933 / 233.7 = 3.99 mm, which a 6 mm leg (a = 4.2 mm) covers.
- The traps: 2.31 mm leaves out the √3, 5.65 mm is the leg length a √2 rather than the throat, and 7.99 mm puts the whole force on one weld.
Check every step: Fillet weld strength, opened with this problem’s numbers
-
Governing ASCE 7 LRFD load on a column
A column in a public assembly building carries these service axial loads: dead D = 120 kN, live L = 90 kN, roof live Lr = 30 kN, snow S = 60 kN and wind W = 80 kN. There is no rain or seismic load. Because the floor is an assembly area, the full L is kept in every combination. What is the governing ASCE 7 LRFD factored axial load?
Show the answer and worked solution
Answer: D, 344 kN
- Combination 2: 1.2D + 1.6L + 0.5S = 144 + 144 + 30 = 318 kN.
- Combination 3: 1.2D + 1.6S + 1.0L = 144 + 96 + 90 = 330 kN (L is larger than 0.5W = 40 kN).
- Combination 4: 1.2D + 1.0W + 1.0L + 0.5S = 144 + 80 + 90 + 30 = 344 kN.
- Combination 1 (1.4D = 168 kN) and combinations 5 to 7 give less, so 344 kN governs.
- The traps: 318 kN stops at combination 2, 330 kN is combination 3, and 398 kN keeps 1.6 on L in the wind combination.
Check every step: Load combinations calculator (ASCE 7 LRFD/ASD and Eurocode), opened with this problem’s numbers
-
Total mass of a delivery of steel pipe
A pipe rack order calls for 15 lengths of steel pipe, 219.1 mm outside diameter with an 8.2 mm wall, each 12 m long. The steel density is 7850 kg/m³. What is the total mass of the delivery?
Show the answer and worked solution
Answer: B, 7.68 t
- Inside diameter: d = 219.1 − 2 × 8.2 = 202.7 mm.
- Area: A = π/4 (219.1² − 202.7²) = 5433 mm², the same as π × 210.9 × 8.2 with the mean diameter.
- Mass per metre: 5433 × 10⁻⁶ × 7850 = 42.65 kg/m.
- Total: 42.65 × 12 × 15 = 7677 kg = 7.68 t.
- The traps: 7.38 t uses π × inside diameter × wall, 7.98 t uses π × outside diameter × wall, and 3.91 t subtracts the wall only once (d = D − t).
Check every step: Steel and metal weight calculator, opened with this problem’s numbers
-
Second moment of area of a tee section about its centroid
A steel tee section is 200 mm deep overall. Its flange is 200 mm wide and 20 mm thick, and the web below it is 180 mm deep and 12 mm thick. What is the second moment of area about the horizontal axis through the centroid?
Show the answer and worked solution
Answer: A, 2000 cm⁴
- Areas: flange 200 × 20 = 4000 mm² at y = 190 mm from the bottom, web 12 × 180 = 2160 mm² at y = 90 mm.
- Centroid: ȳ = (4000 × 190 + 2160 × 90) / 6160 = 154.9 mm from the bottom.
- Parallel axes: Ix = 200 × 20³/12 + 4000 × 35.1² + 12 × 180³/12 + 2160 × 64.9² = 1.999 × 10⁷ mm⁴ = 2000 cm⁴.
- The traps: 597 cm⁴ adds the b h³/12 of each part without the A d² terms, 3860 cm⁴ takes the axis at mid-depth (100 mm), and 16 800 cm⁴ is the value about the bottom edge.
Check every step: Moment of inertia calculator (section properties), opened with this problem’s numbers
-
Snow load on a 40° pitched roof (EN 1991-1-3)
A heated building on normal terrain has a duopitch roof sloped at 40°. The characteristic ground snow load is 1.2 kPa. Using EN 1991-1-3 with Ce = 1.0 and Ct = 1.0, what is the undrifted roof snow load per square metre of plan area?
Show the answer and worked solution
Answer: C, 0.640 kPa
- Shape coefficient for 30° ≤ α ≤ 60°: μ1 = 0.8 (60 − α)/30 = 0.8 × 20/30 = 0.533.
- Roof load: s = μ1 Ce Ct sk = 0.533 × 1.0 × 1.0 × 1.2 = 0.640 kPa.
- The traps: 0.490 kPa converts to the area along the slope (× cos 40°) although the load is per plan area, 0.960 kPa uses μ1 = 0.8 for a flat roof, and 1.200 kPa uses the ground load unchanged.
Check every step: Snow load calculator (Eurocode and ASCE 7), opened with this problem’s numbers
-
ASCE 7 velocity pressure at the roof of a warehouse
An enclosed warehouse stands on flat open terrain, Exposure C, at sea level. The basic wind speed is 115 mph and the mean roof height is 30 ft. Take Kzt = 1.0, Kd = 0.85 and Ke = 1.0. Using ASCE 7, what is the velocity pressure qz at roof height?
Show the answer and worked solution
Answer: D, 28.3 psf
- Exposure coefficient: Kz = 2.01 (z/zg)^(2/α) = 2.01 × (30/900)^(2/9.5) = 0.98 for Exposure C at 30 ft.
- Velocity pressure: qz = 0.00256 Kz Kzt Kd Ke V² = 0.00256 × 0.982 × 1.0 × 0.85 × 1.0 × 115² = 28.3 psf.
- The traps: 20.2 psf uses Exposure B (Kz = 0.70), 24.0 psf multiplies by the gust factor G = 0.85, which belongs in the design pressure p = q G Cp, and 33.3 psf leaves out Kd.
Check every step: Wind load calculator (Eurocode and ASCE 7), opened with this problem’s numbers
-
Largest top chord force in a Pratt roof truss
A flat Pratt roof truss with vertical end posts spans 24 m with a depth of 3 m between chord centres and has 8 panels of 3 m. A total roof load of 240 kN acts on the top chord joints: 30 kN at each interior joint and 15 kN at each end joint. What is the largest compression force in the top chord?
Show the answer and worked solution
Answer: C, 240 kN
- Reactions: R = 240 / 2 = 120 kN at each support.
- Moment at midspan: M = (120 − 15) × 12 − 30 × (9 + 6 + 3) = 720 kN·m, the same as W L/8 = 240 × 24/8.
- Method of sections through a centre panel, moments about the bottom joint at midspan: C = M / H = 720 / 3 = 240 kN.
- The traps: 148 kN is the force in the end diagonal, 225 kN is the largest bottom chord tension (moments about the top joint 3 m from midspan), and 480 kN treats the whole load as a point load at midspan (W L/4).
Check every step: Truss calculator (Pratt, Howe, Warren), opened with this problem’s numbers
-
Mass of reinforcement in a two-mat ground slab
A ground slab 8 m × 6 m is reinforced with 12 mm bars at 200 mm centres both ways, in top and bottom mats. The cover to the slab edges is 50 mm. Each bar runs the full slab dimension less the cover at both ends, and the first bar in each direction sits on the cover line. The steel density is 7850 kg/m³. Ignore laps. What is the total mass of reinforcement?
Show the answer and worked solution
Answer: A, 840 kg
- Unit mass: π/4 × 0.012² × 7850 = 0.888 kg/m.
- Bars along the 8 m length: (6 − 0.1)/0.2 = 29.5, so 29 spaces and 30 bars of 7.9 m = 237 m.
- Bars along the 6 m width: (8 − 0.1)/0.2 = 39.5, so 40 bars of 5.9 m = 236 m.
- Two mats: 2 × (237 + 236) = 946 m, and the mass is 946 × 0.888 = 840 kg.
- The traps: 420 kg counts one mat only, 815 kg counts spaces instead of bars (29 and 39), and 877 kg ignores the cover in both the bar length and the bar count.
Check every step: Rebar weight and quantity calculator, opened with this problem’s numbers
Results are estimates. They do not replace the governing code, class or flag requirements, or a check by a competent person.