Metals, timber and construction materials
| Material | kg/m³ | lb/ft³ | Specific gravity |
|---|---|---|---|
| Carbon steel (EN 1993-1-1) | 7 850 | 490.1 | 7.850 |
| Stainless steel 304 / 1.4301 | 7 900 | 493.2 | 7.900 |
| Stainless steel 316 / 1.4401 | 8 000 | 499.4 | 8.000 |
| Cast iron, grey | 7 200 | 449.5 | 7.200 |
| Aluminium | 2 700 | 168.6 | 2.700 |
| Copper | 8 960 | 559.4 | 8.960 |
| Brass | 8 500 | 530.6 | 8.500 |
| Bronze | 8 800 | 549.4 | 8.800 |
| Lead | 11 340 | 707.9 | 11.340 |
| Zinc | 7 140 | 445.7 | 7.140 |
| Titanium | 4 506 | 281.3 | 4.506 |
| Nickel | 8 908 | 556.1 | 8.908 |
| Silver | 10 490 | 654.9 | 10.490 |
| Gold | 19 300 | 1 205 | 19.301 |
| Softwood timber C16 (EN 338 mean) | 370 | 23.10 | 0.370 |
| Softwood timber C24 (EN 338 mean) | 420 | 26.22 | 0.420 |
| Hardwood timber D30 (EN 338 mean) | 640 | 39.95 | 0.640 |
| Hardwood timber D40 (EN 338 mean) | 660 | 41.20 | 0.660 |
| Concrete, plain normal-weight, typical | 2 400 | 149.8 | 2.400 |
| Concrete, reinforced, typical | 2 500 | 156.1 | 2.500 |
| Glass, soda-lime (EN 572-1) | 2 500 | 156.1 | 2.500 |
| Ice, 0 °C | 917 | 57.25 | 0.917 |
Liquids
| Liquid | kg/m³ | lb/ft³ | Specific gravity |
|---|---|---|---|
| Water, 20 °C | 998 | 62.32 | 0.998 |
| Water, 4 °C (maximum density) | 1 000 | 62.43 | 1.000 |
| Sea water, 35 g/kg salinity, 15 °C | 1 026 | 64.04 | 1.026 |
| Ethanol, 20 °C | 789 | 49.27 | 0.789 |
| Methanol, 20 °C | 791 | 49.41 | 0.791 |
| Acetone, 25 °C | 785 | 48.97 | 0.785 |
| Benzene, 20 °C | 877 | 54.72 | 0.877 |
| Toluene, 20 °C | 867 | 54.11 | 0.867 |
| Glycerol, 20 °C | 1 261 | 78.74 | 1.261 |
| Ethylene glycol, 20 °C | 1 114 | 69.51 | 1.114 |
| Mercury, 20 °C | 13 546 | 845.6 | 13.546 |
| Petrol (gasoline), 15 °C, typical (EN 228: 720–775) | 745 | 46.51 | 0.745 |
| Diesel fuel, 15 °C, typical (EN 590: 820–845) | 835 | 52.13 | 0.835 |
Gases at 0 °C and 101.325 kPa
| Gas | kg/m³ | lb/ft³ | Specific gravity (to water) |
|---|---|---|---|
| Air, dry, 0 °C and 1 atm | 1.2930 | 0.08072 | 0.00129 |
| Nitrogen, 0 °C and 1 atm | 1.2506 | 0.07807 | 0.00125 |
| Oxygen, 0 °C and 1 atm | 1.4290 | 0.08921 | 0.00143 |
| Carbon dioxide, 0 °C and 1 atm | 1.9770 | 0.1234 | 0.00198 |
| Hydrogen, 0 °C and 1 atm | 0.0899 | 0.005612 | 0.00009 |
| Helium, 0 °C and 1 atm | 0.1785 | 0.01114 | 0.00018 |
| Argon, 0 °C and 1 atm | 1.7837 | 0.1114 | 0.00178 |
| Methane, 0 °C and 1 atm | 0.7170 | 0.04476 | 0.00072 |
How the table was made
Liquid and element densities are CRC Handbook values; carbon steel is the EN 1993-1-1 design value, stainless steels EN 10088-1, timber the EN 338 mean densities, glass EN 572-1. Fuels, concrete and cast iron vary between batches, so their values are typical figures.
Gas densities are real-gas normal densities at 0 °C and 1 atm. At other conditions use the ideal gas law, ρ = p M / (R T), or the gas density in the density calculator.
FAQ
What is the density of steel?
Carbon steel is 7 850 kg/m³ (490 lb/ft³), the value used in EN 1993 and most design. Stainless steels are 7 900 to 8 000 kg/m³.
What is the difference between density and specific gravity?
Specific gravity is the density divided by the density of water, so it has no unit. The SG of steel is 7.85.
Calculators that use this table
- Density calculator (mass, volume and density): Density, mass or volume from the other two, with reference densities of water, solvents, fuels, gases, metals, timber, concrete and glass.
- Steel and metal weight calculator: Weight of steel, stainless, aluminium, copper and brass plate, bar, tube, pipe, angle, beam and channel, per metre or foot, per piece and in total.
- Specific gravity calculator (SG, API gravity, Baumé): Specific gravity of liquids from density, API gravity or Baumé degrees, and of gases from the molar mass, with density in kg/m³, lb/ft³ and lb/gal.
- Engineering unit converter: Convert pressure, torque, power, flow, length, mass, speed, temperature, energy and marine units (knots, nautical miles, long tons) from one table.
Sources
- CRC Handbook of Chemistry and Physics, 104th edition.
- EN 1993-1-1:2005, clause 3.2.6.
- EN 338:2016, Structural timber: strength classes.
- EN 10088-1:2014, Stainless steels.