Rockwell C to Vickers, Brinell and tensile strength (steel)
| HRC | HV | HBW | Rm ≈ (MPa) |
|---|---|---|---|
| 68 | 940 | – | – |
| 67 | 900 | – | – |
| 66 | 865 | – | – |
| 65 | 832 | 739 | – |
| 64 | 800 | 722 | – |
| 63 | 772 | 705 | – |
| 62 | 746 | 688 | – |
| 61 | 720 | 670 | – |
| 60 | 697 | 654 | – |
| 59 | 674 | 634 | – |
| 58 | 653 | 615 | – |
| 57 | 633 | 595 | 2 117 |
| 56 | 613 | 577 | 2 042 |
| 55 | 595 | 560 | 1 975 |
| 54 | 577 | 543 | 1 908 |
| 53 | 560 | 525 | 1 845 |
| 52 | 544 | 512 | 1 789 |
| 51 | 528 | 496 | 1 732 |
| 50 | 513 | 481 | 1 676 |
| 49 | 498 | 469 | 1 623 |
| 48 | 484 | 455 | 1 571 |
| 47 | 471 | 443 | 1 524 |
| 46 | 458 | 432 | 1 479 |
| 45 | 446 | 421 | 1 441 |
| 44 | 434 | 409 | 1 399 |
| 43 | 423 | 400 | 1 361 |
| 42 | 412 | 390 | 1 326 |
| 41 | 402 | 381 | 1 296 |
| 40 | 392 | 371 | 1 262 |
| 39 | 382 | 362 | 1 227 |
| 38 | 372 | 353 | 1 196 |
| 37 | 363 | 344 | 1 166 |
| 36 | 354 | 336 | 1 137 |
| 35 | 345 | 327 | 1 110 |
| 34 | 336 | 319 | 1 081 |
| 33 | 327 | 311 | 1 051 |
| 32 | 318 | 301 | 1 023 |
| 31 | 310 | 294 | 995 |
| 30 | 302 | 286 | 971 |
| 29 | 294 | 279 | 946 |
| 28 | 286 | 271 | 918 |
| 27 | 279 | 264 | 896 |
| 26 | 272 | 258 | 871 |
| 25 | 266 | 253 | 853 |
| 24 | 260 | 247 | 835 |
| 23 | 254 | 243 | 816 |
| 22 | 248 | 237 | 794 |
| 21 | 243 | 231 | 779 |
| 20 | 238 | 226 | 764 |
Rockwell B to Vickers, Brinell and tensile strength (steel)
| HRB | HV | HBW | Rm ≈ (MPa) |
|---|---|---|---|
| 100 | 240 | 240 | 770 |
| 99 | 234 | 234 | 752 |
| 98 | 228 | 228 | 732 |
| 97 | 222 | 222 | 711 |
| 96 | 216 | 216 | 693 |
| 95 | 210 | 210 | 675 |
| 94 | 205 | 205 | 660 |
| 93 | 200 | 200 | 640 |
| 92 | 195 | 195 | 625 |
| 91 | 190 | 190 | 610 |
| 90 | 185 | 185 | 595 |
| 89 | 180 | 180 | 575 |
| 88 | 176 | 176 | 563 |
| 87 | 172 | 172 | 551 |
| 86 | 169 | 169 | 542 |
| 85 | 165 | 165 | 530 |
| 84 | 162 | 162 | 518 |
| 83 | 159 | 159 | 507 |
| 82 | 156 | 156 | 498 |
| 81 | 153 | 153 | 489 |
| 80 | 150 | 150 | 480 |
| 79 | 147 | 147 | 471 |
| 78 | 144 | 144 | 462 |
| 77 | 141 | 141 | 453 |
| 76 | 139 | 139 | 446 |
| 75 | 137 | 137 | 438 |
| 74 | 135 | 135 | 430 |
| 73 | 132 | 132 | 421 |
| 72 | 130 | 130 | 415 |
| 71 | 127 | 127 | 406 |
| 70 | 125 | 125 | 400 |
| 69 | 123 | 123 | 394 |
| 68 | 121 | 121 | 388 |
| 67 | 119 | 119 | 382 |
| 66 | 117 | 117 | 376 |
| 65 | 116 | 116 | 373 |
| 64 | 114 | 114 | 366 |
| 63 | 112 | 112 | 358 |
| 62 | 110 | 110 | 350 |
| 61 | 108 | 108 | 344 |
| 60 | 107 | 107 | 341 |
| 59 | 106 | 106 | 338 |
| 58 | 104 | 104 | 332 |
| 57 | 103 | 103 | 329 |
| 56 | 101 | 101 | 323 |
| 55 | 100 | 100 | 320 |
How the table was made
Each row is the hardness conversion calculator’s result for that value: ASTM E140 Table 1 (Rockwell C range) and Table 2 (Rockwell B range) for the hardness numbers, and ISO 18265 Table A.1 for the tensile estimate, which covers 80 to 650 HV. A dash means the source table gives no value there. In the Rockwell B range E140 gives the same number for Vickers and for the 3 000 kgf Brinell test.
Conversions are approximate and apply only to carbon and low-alloy steels in the heat-treated, hot-rolled or annealed condition. Austenitic stainless steel, cold-worked material, cast iron and non-ferrous metals need their own tables. Near 20 HRC and 98 to 100 HRB the two E140 tables meet and differ by up to 10 HV.
FAQ
What is 30 HRC in Brinell?
About 286 HBW, and 302 HV, for steel.
Can I trust the tensile strength from hardness?
Only as an estimate. ISO 18265 calls it the least reliable conversion; use a tensile test where the strength matters.
Calculators that use this table
- Hardness conversion calculator (HRC, HRB, HV, HB): Approximate conversion of steel hardness between Rockwell C, Rockwell B, Vickers and Brinell, with tensile strength, from ASTM E140 and ISO 18265.
- Material properties table (steel, aluminium, plastics): Density, Young's modulus, yield and tensile strength, thermal expansion, conductivity, specific heat and melting range of common materials, with mass.
- Stress and strain calculator (Young's modulus): Axial stress, strain and elongation of a bar from force, area, length and Young's modulus, or solve for the force, modulus, area or length.
- Bolt torque and preload: Preload and tightening torque for ISO metric bolts by the VDI 2230 method, with property class, friction, proof load and preload scatter.
Sources
- ASTM E140-12b(2019)e1, Standard Hardness Conversion Tables for Metals, Tables 1 and 2.
- ISO 18265:2013, Metallic materials: conversion of hardness values, Annex A, Table A.1.
- ASTM A370-24, Mechanical testing of steel products, section 17 (use of hardness conversions).