Metric threads, ISO 261 and ISO 262 (drills in mm)
| Thread | Pitch | 75 % drill (mm) | Nearest drill | Drill (mm) | Thread |
|---|---|---|---|---|---|
| M2 × 0.4 (coarse) | 0.40 mm | 1.61 | 1.6 mm | 1.60 | 77 % |
| M2.5 × 0.45 (coarse) | 0.45 mm | 2.06 | 2.05 mm | 2.05 | 77 % |
| M3 × 0.5 (coarse) | 0.50 mm | 2.51 | 2.5 mm | 2.50 | 77 % |
| M3 × 0.35 (fine) | 0.35 mm | 2.66 | 2.65 mm | 2.65 | 77 % |
| M4 × 0.7 (coarse) | 0.70 mm | 3.32 | 3.3 mm | 3.30 | 77 % |
| M4 × 0.5 (fine) | 0.50 mm | 3.51 | 3.5 mm | 3.50 | 77 % |
| M5 × 0.8 (coarse) | 0.80 mm | 4.22 | 4.2 mm | 4.20 | 77 % |
| M5 × 0.5 (fine) | 0.50 mm | 4.51 | 4.5 mm | 4.50 | 77 % |
| M6 × 1 (coarse) | 1.00 mm | 5.03 | 5 mm | 5.00 | 77 % |
| M6 × 0.75 (fine) | 0.75 mm | 5.27 | 5.3 mm | 5.30 | 72 % |
| M8 × 1.25 (coarse) | 1.25 mm | 6.78 | 6.8 mm | 6.80 | 74 % |
| M8 × 1 (fine) | 1.00 mm | 7.03 | 7 mm | 7.00 | 77 % |
| M10 × 1.5 (coarse) | 1.50 mm | 8.54 | 8.5 mm | 8.50 | 77 % |
| M10 × 1.25 (fine) | 1.25 mm | 8.78 | 8.8 mm | 8.80 | 74 % |
| M10 × 1 (fine) | 1.00 mm | 9.03 | 9 mm | 9.00 | 77 % |
| M12 × 1.75 (coarse) | 1.75 mm | 10.30 | 10.3 mm | 10.30 | 75 % |
| M12 × 1.5 (fine) | 1.50 mm | 10.54 | 10.5 mm | 10.50 | 77 % |
| M12 × 1.25 (fine) | 1.25 mm | 10.78 | 10.8 mm | 10.80 | 74 % |
| M14 × 2 (coarse) | 2.00 mm | 12.05 | 12.1 mm | 12.10 | 73 % |
| M14 × 1.5 (fine) | 1.50 mm | 12.54 | 12.5 mm | 12.50 | 77 % |
| M16 × 2 (coarse) | 2.00 mm | 14.05 | 14 mm | 14.00 | 77 % |
| M16 × 1.5 (fine) | 1.50 mm | 14.54 | 14.5 mm | 14.50 | 77 % |
| M18 × 2.5 (coarse) | 2.50 mm | 15.56 | 15.5 mm | 15.50 | 77 % |
| M18 × 1.5 (fine) | 1.50 mm | 16.54 | 16.5 mm | 16.50 | 77 % |
| M20 × 2.5 (coarse) | 2.50 mm | 17.56 | 17.5 mm | 17.50 | 77 % |
| M20 × 1.5 (fine) | 1.50 mm | 18.54 | 18.5 mm | 18.50 | 77 % |
| M22 × 2.5 (coarse) | 2.50 mm | 19.56 | 19.5 mm | 19.50 | 77 % |
| M22 × 1.5 (fine) | 1.50 mm | 20.54 | 20.5 mm | 20.50 | 77 % |
| M24 × 3 (coarse) | 3.00 mm | 21.08 | 21 mm | 21.00 | 77 % |
| M24 × 2 (fine) | 2.00 mm | 22.05 | 22 mm | 22.00 | 77 % |
Unified inch threads, ASME B1.1 (drills in inches)
| Thread | Pitch | 75 % drill (in) | Nearest drill | Drill (in) | Thread |
|---|---|---|---|---|---|
| #4-40 UNC | 40 TPI | 0.0876 | #43 | 0.0890 | 71 % |
| #4-48 UNF | 48 TPI | 0.0917 | #42 | 0.0935 | 68 % |
| #5-40 UNC | 40 TPI | 0.1006 | #38 | 0.1015 | 72 % |
| #5-44 UNF | 44 TPI | 0.1029 | #37 | 0.1040 | 71 % |
| #6-32 UNC | 32 TPI | 0.1076 | #36 | 0.1065 | 78 % |
| #6-40 UNF | 40 TPI | 0.1136 | #33 | 0.1130 | 77 % |
| #8-32 UNC | 32 TPI | 0.1336 | #29 | 0.1360 | 69 % |
| #8-36 UNF | 36 TPI | 0.1369 | #29 | 0.1360 | 78 % |
| #10-24 UNC | 24 TPI | 0.1494 | #25 | 0.1495 | 75 % |
| #10-32 UNF | 32 TPI | 0.1596 | #21 | 0.1590 | 76 % |
| #12-24 UNC | 24 TPI | 0.1754 | #16 | 0.1770 | 72 % |
| #12-28 UNF | 28 TPI | 0.1812 | #14 | 0.1820 | 73 % |
| 1/4-20 UNC | 20 TPI | 0.2013 | #7 | 0.2010 | 75 % |
| 1/4-28 UNF | 28 TPI | 0.2152 | #3 | 0.2130 | 80 % |
| 5/16-18 UNC | 18 TPI | 0.2584 | F | 0.2570 | 77 % |
| 5/16-24 UNF | 24 TPI | 0.2719 | I | 0.2720 | 75 % |
| 3/8-16 UNC | 16 TPI | 0.3141 | 5/16 in | 0.3125 | 77 % |
| 3/8-24 UNF | 24 TPI | 0.3344 | Q | 0.3320 | 79 % |
| 7/16-14 UNC | 14 TPI | 0.3679 | U | 0.3680 | 75 % |
| 7/16-20 UNF | 20 TPI | 0.3888 | 25/64 in | 0.3906 | 72 % |
| 1/2-13 UNC | 13 TPI | 0.4251 | 27/64 in | 0.4219 | 78 % |
| 1/2-20 UNF | 20 TPI | 0.4513 | 29/64 in | 0.4531 | 72 % |
| 9/16-12 UNC | 12 TPI | 0.4813 | 31/64 in | 0.4844 | 72 % |
| 9/16-18 UNF | 18 TPI | 0.5084 | 33/64 in | 0.5156 | 65 % |
| 5/8-11 UNC | 11 TPI | 0.5364 | 17/32 in | 0.5313 | 79 % |
| 5/8-18 UNF | 18 TPI | 0.5709 | 37/64 in | 0.5781 | 65 % |
| 3/4-10 UNC | 10 TPI | 0.6526 | 21/32 in | 0.6563 | 72 % |
| 3/4-16 UNF | 16 TPI | 0.6891 | 11/16 in | 0.6875 | 77 % |
| 7/8-9 UNC | 9 TPI | 0.7667 | 49/64 in | 0.7656 | 76 % |
| 7/8-14 UNF | 14 TPI | 0.8054 | 13/16 in | 0.8125 | 67 % |
| 1-8 UNC | 8 TPI | 0.8782 | 7/8 in | 0.8750 | 77 % |
| 1-12 UNF | 12 TPI | 0.9188 | 59/64 in | 0.9219 | 72 % |
How the table was made
Theoretical drill = D − 1.299 × P × (percentage / 100), the Machinery’s Handbook and OSG convention, with D the major diameter and P the pitch. Nearest drills come from metric jobber sizes (0.05 mm steps to 3 mm, 0.1 mm to 13 mm, 0.5 mm above) and from inch fractional, number and letter sizes (ASME B94.11M).
The nearest drill can differ from a printed chart by one size, for example 10.3 mm for M12 where many charts give 10.2 mm; both give a usable thread. Roll-form taps need a larger hole: use the tap maker’s chart for those. In hard or tough materials, a percentage nearer 60 to 65 % eases tapping.
FAQ
What size drill for an M8 tap?
For M8 × 1.25 coarse, a 6.8 mm drill (the theoretical 75 % drill is 6.78 mm). For M8 × 1 fine, 7.0 mm.
What size drill for a 1/4-20 tap?
A #7 drill (0.201 in), which gives about 75 % thread. A 13/64 in drill (0.2031 in) gives about 72 %.
Is a quick rule to drill at the major diameter minus the pitch close enough?
For metric threads, yes: D − P gives about 77 % thread. M10 × 1.5 becomes 8.5 mm.
Calculators that use this table
- Tap drill size calculator (metric and UNC/UNF): Tap drill for metric coarse and fine and UNC/UNF threads at any percentage of thread, with the nearest standard drill and the basic pitch and minor diameters.
- Drill point length calculator: Length of a drill point from diameter and point angle (118°, 135°, 140°), and the depth to drill for a full-diameter blind hole or a through hole.
- Speeds and feeds calculator (milling, turning, drilling): Spindle rpm, feed rate and metal removal rate for milling, turning and drilling, with starting cutting speeds for common materials in HSS and carbide.
- Bolt torque and preload: Preload and tightening torque for ISO metric bolts by the VDI 2230 method, with property class, friction, proof load and preload scatter.
Sources
- ISO 261:1998 and ISO 262:1998, ISO general purpose metric screw threads.
- ASME B1.1-2019, Unified Inch Screw Threads.
- ASME B94.11M, Twist Drills (drill sizes).
- Machinery’s Handbook, 31st edition: tap drill sizes and percentage of thread.