Civil engineering practice problems
10 multiple-choice problems in the style of the FE and PE engineering exams. Pick an answer to check it, then open the worked solution. Every answer is recomputed by the civil calculator that solves it, and the solution opens that calculator with the problem's numbers filled in.
-
Discharge of a trapezoidal earth canal (Manning)
An earth irrigation canal has a trapezoidal section with a 2.5 m bottom width and side slopes of 1.5 horizontal to 1 vertical. It flows at a uniform depth of 1.2 m on a bed slope of 0.0008. Manning's n is 0.025. What is the discharge?
Show the answer and worked solution
Answer: A, 4.84 m³/s
- Area: A = (b + z y) y = (2.5 + 1.5 × 1.2) × 1.2 = 5.16 m².
- Wetted perimeter: P = b + 2 y √(1 + z²) = 2.5 + 2 × 1.2 × 1.803 = 6.83 m, so R = A/P = 0.756 m.
- Manning in SI units: Q = (1/n) A R^(2/3) S^(1/2) = 40 × 5.16 × 0.830 × 0.0283 = 4.84 m³/s.
- The traps: 6.04 m³/s takes P = b + 2y as for a rectangle, 7.22 m³/s uses the US coefficient 1.49 with SI units, and 3.65 m³/s reads the side slope as 1 horizontal to 1.5 vertical.
Check every step: Open-channel flow (Manning), opened with this problem’s numbers
-
Peak runoff from a mixed catchment (rational method)
A 7 ha business park drains to one outfall. It has 2.0 ha of asphalt (C = 0.90), 1.5 ha of roofs (C = 0.95) and 3.5 ha of lawns (C = 0.20). The design storm is a 25-year event with an intensity of 85 mm/h at the time of concentration, and the frequency factor for 25 years is Cf = 1.1. Using the rational method, what is the peak runoff?
Show the answer and worked solution
Answer: C, 1.02 m³/s
- Composite C: (2.0 × 0.90 + 1.5 × 0.95 + 3.5 × 0.20) / 7.0 = 3.925 / 7.0 = 0.561.
- Design coefficient: C Cf = 0.561 × 1.1 = 0.617, below the cap of 1.0.
- Peak flow: Q = C Cf i A / 360 = 0.617 × 85 × 7.0 / 360 = 1.02 m³/s, with A in ha and i in mm/h.
- The traps: 0.93 m³/s leaves out the frequency factor, 1.24 m³/s averages the three C values without weighting them by area, and 1.16 m³/s uses the 100-year factor 1.25.
Check every step: Rational-method runoff, opened with this problem’s numbers
-
Consolidation settlement of a normally consolidated clay layer
A 4 m thick layer of normally consolidated clay lies under a new embankment. Its initial void ratio is 1.10 and its compression index is 0.36. At mid-layer the initial vertical effective stress is 70 kPa and the embankment adds 50 kPa. What is the final primary consolidation settlement of the layer?
Show the answer and worked solution
Answer: B, 161 mm
- Normally consolidated clay: S = Cc H / (1 + e0) × log10((σ′0 + Δσ) / σ′0).
- S = 0.36 × 4 / 2.10 × log10(120 / 70) = 0.686 × 0.234 = 0.161 m = 161 mm.
- The traps: 80 mm uses half the layer thickness (the drainage path) as H, 306 mm divides by e0 instead of 1 + e0, and 370 mm uses the natural log instead of log10.
Check every step: Consolidation settlement calculator (clay layer), opened with this problem’s numbers
-
Allowable load on a square pad footing on clay (Terzaghi)
A 2.0 m square pad footing is founded 1.2 m deep in saturated clay with an undrained shear strength of 60 kPa and a unit weight of 18 kN/m³. Check the short-term (φ = 0) case with Terzaghi's bearing capacity equation and a factor of safety of 3 on the ultimate value. What allowable column load can the footing carry?
Show the answer and worked solution
Answer: D, 622 kN
- Terzaghi factors for φ = 0: Nc = 5.7, Nq = 1, Nγ = 0.
- Square footing: q_ult = 1.3 c Nc + γ Df Nq = 1.3 × 60 × 5.7 + 18 × 1.2 = 444.6 + 21.6 = 466.2 kPa.
- Allowable: q_all = 466.2 / 3 = 155.4 kPa, and the load is 155.4 × 2.0 × 2.0 = 622 kN.
- The traps: 485 kN leaves out the 1.3 shape factor (the strip footing equation), 593 kN drops the overburden term γ Df, and 1860 kN forgets the factor of safety.
Check every step: Soil bearing capacity calculator (Terzaghi and Eurocode 7), opened with this problem’s numbers
-
Rankine active thrust on a wall with a surcharge
A cantilever retaining wall holds 4.5 m of level granular backfill with φ = 32° and γ = 19 kN/m³. A uniform surcharge of 12 kPa acts on the backfill surface. The wall can move enough to develop active pressure. Using Rankine theory and ignoring wall friction, what is the total lateral thrust per metre run of wall?
Show the answer and worked solution
Answer: A, 75.7 kN/m
- Active coefficient: Ka = tan²(45° − φ/2) = tan²(29°) = 0.307.
- Soil thrust: ½ Ka γ H² = 0.5 × 0.307 × 19 × 4.5² = 59.1 kN/m.
- Surcharge thrust: Ka q H = 0.307 × 12 × 4.5 = 16.6 kN/m.
- Total: P = 59.1 + 16.6 = 75.7 kN/m.
- The traps: 59.1 kN/m leaves out the surcharge, 115.8 kN/m uses the at-rest coefficient K0 = 1 − sin φ = 0.470, and 134.8 kN/m forgets the ½ on the triangular soil pressure.
Check every step: Retaining wall earth pressure calculator (Rankine), opened with this problem’s numbers
-
Relative compaction from a nuclear gauge test
A nuclear gauge test on a compacted fill layer gives a wet density of 2030 kg/m³ and a moisture content of 16 %. The laboratory Proctor test on the same soil gave a maximum dry density of 1840 kg/m³. What is the relative compaction of the layer?
Show the answer and worked solution
Answer: C, 95.1 %
- Field dry density: ρd = ρ / (1 + w) = 2030 / 1.16 = 1750 kg/m³.
- Relative compaction: RC = ρd / ρd,max = 1750 / 1840 = 95.1 %.
- The traps: 92.7 % takes ρd = ρ (1 − w), 110.3 % compares the wet density with the maximum dry density, and 105.1 % inverts the ratio.
Check every step: Soil compaction calculator (Proctor relative compaction), opened with this problem’s numbers
-
Stopping sight distance on a crest vertical curve
A crest vertical curve joins a +2.5 % grade to a −1.5 % grade over a horizontal length of 240 m. Using the AASHTO metric criteria (driver eye height 1.08 m, object height 0.60 m), what stopping sight distance does the curve provide? Assume the sight distance is shorter than the curve.
Show the answer and worked solution
Answer: B, 199 m
- Algebraic difference of grades: A = 2.5 − (−1.5) = 4.0 %.
- Crest curve with S < L: L = A S² / 658, so S = √(658 L / A) = √(658 × 240 / 4.0) = 199 m.
- Check: 199 m is less than L = 240 m, so the assumption holds.
- The traps: 156 m uses the older constant 404 (150 mm object), 240 m uses the sag headlight formula L = A S²/(120 + 3.5 S), and 360 m uses the US constant 2158, meant for feet, with metres.
Check every step: Vertical curve calculator (crest and sag), opened with this problem’s numbers
-
Flow over a contracted rectangular weir (Francis)
A sharp-crested rectangular weir with two end contractions measures the flow in an irrigation ditch. The crest is 3.0 ft long and 2.0 ft above the channel bed, and the measured head over the crest is 0.80 ft. Using the Francis formula, what is the discharge?
Show the answer and worked solution
Answer: D, 6.77 cfs
- Effective crest length: L′ = L − 0.1 n H = 3.0 − 0.1 × 2 × 0.80 = 2.84 ft.
- Francis formula in US units: Q = 3.33 L′ H^1.5 = 3.33 × 2.84 × 0.80^1.5 = 6.77 cfs.
- The traps: 7.15 cfs ignores the end contractions, 6.96 cfs allows for one contraction only, and 3.74 cfs uses the SI coefficient 1.84 with feet.
Check every step: Weir and flume flow calculator, opened with this problem’s numbers
-
Loose haul volume of a road cut (prismoidal formula)
Two road cross-sections 25 m apart have cut areas of 42 m² and 68 m², and the section midway between them has a cut area of 54 m². The clay swells by 25 % when it is excavated. Using the prismoidal formula, what loose volume must the trucks haul from this length?
Show the answer and worked solution
Answer: A, 1700 m³
- Prismoidal bank volume: V = L/6 × (A1 + 4 Am + A2) = 25/6 × (42 + 4 × 54 + 68) = 1358 m³.
- Loose volume: V_loose = V (1 + swell) = 1358 × 1.25 = 1698 m³, about 1700 m³.
- The traps: 1360 m³ is the bank volume without swell, 1020 m³ applies the 25 % as a reduction, and 1810 m³ divides by 0.75 instead of multiplying by 1.25.
Check every step: Earthwork cut and fill volumes, opened with this problem’s numbers
-
Ready-mix order for a garage floor slab
A garage floor slab measures 30 ft by 24 ft and is 5 in thick. The contractor adds 8 % for waste, spillage and an uneven subgrade. How many cubic yards of ready-mix concrete should be ordered?
Show the answer and worked solution
Answer: C, 12.0 yd³
- Volume: V = 30 × 24 × 5/12 = 300 ft³.
- In cubic yards: 300 / 27 = 11.11 yd³.
- With waste: 11.11 × 1.08 = 12.0 yd³.
- The traps: 11.1 yd³ forgets the waste, 36.0 yd³ divides by 9 (square feet to square yards) instead of 27, and 14.4 yd³ takes 5 in as 0.5 ft.
Check every step: Concrete slab calculator, opened with this problem’s numbers
Results are estimates. They do not replace the governing code, class or flag requirements, or a check by a competent person.