Chemical and process engineering practice problems
10 multiple-choice problems in the style of the FE and PE engineering exams. Pick an answer to check it, then open the worked solution. Every answer is recomputed by the process and chemical calculator that solves it, and the solution opens that calculator with the problem's numbers filled in.
-
Minimum stages for a benzene and toluene column
A distillation column separates a benzene and toluene feed containing 50 mol% benzene. The distillate must contain 96 mol% benzene and the bottoms 4 mol% benzene. The average relative volatility of benzene to toluene is 2.4. Using the Fenske equation, what is the minimum number of theoretical stages at total reflux?
Show the answer and worked solution
Answer: B, 7.26 stages
- Fenske: N_min = ln[(x_D / (1 − x_D)) × ((1 − x_B) / x_B)] / ln α.
- Separation factor: (0.96 / 0.04) × (0.96 / 0.04) = 24 × 24 = 576.
- N_min = ln 576 / ln 2.4 = 6.356 / 0.875 = 7.26 theoretical stages, the reboiler counted as one of them.
- The traps: 3.63 keeps only the distillate ratio 24 and drops the bottoms term, 6.26 subtracts the reboiler although the question asks for theoretical stages, and 2.65 divides ln 576 by α instead of ln α.
Check every step: Distillation stages calculator (Fenske–Underwood–Gilliland), opened with this problem’s numbers
-
Boiling point of water in a vacuum evaporator
A vacuum evaporator concentrates a dilute aqueous solution, which may be treated as pure water. The vacuum gauge on the vapour space reads 600 mmHg of vacuum while the barometer reads 760 mmHg. Using the Antoine equation for water, at what temperature does the liquid boil?
Show the answer and worked solution
Answer: C, 61.5 °C
- Absolute pressure: p = 760 − 600 = 160 mmHg = 160 × 0.13332 = 21.33 kPa.
- Antoine equation for water: log10 p = A − B / (T + C); solved for T at 21.33 kPa it gives T = 334.6 K.
- T = 334.6 − 273.15 = 61.5 °C.
- The traps: 93.5 °C takes the 600 mmHg reading (80.0 kPa) as the absolute pressure, 113.3 °C reads 160 mmHg as 160 kPa, and 100.0 °C ignores the vacuum and gives the normal boiling point.
Check every step: Vapour pressure calculator (Antoine equation), opened with this problem’s numbers
-
Wash water needed to dilute a caustic soda stream
A plant stream of 1200 kg/h of caustic soda solution at 30 % NaOH by mass must be diluted to 18 % NaOH by mass. The only diluent available is a recycled wash water that already contains 2 % NaOH by mass. What flow of wash water is needed?
Show the answer and worked solution
Answer: A, 900 kg/h
- NaOH balance: m1 x1 + m2 x2 = (m1 + m2) x_mix, so m2 = m1 (x1 − x_mix) / (x_mix − x2).
- m2 = 1200 × (0.30 − 0.18) / (0.18 − 0.02) = 1200 × 0.12 / 0.16 = 900 kg/h.
- Check: the mix is 2100 kg/h carrying 360 + 18 = 378 kg/h of NaOH, which is 18 %.
- The traps: 800 kg/h treats the wash water as pure water, 2100 kg/h is the mixed flow rather than the wash water, and 1600 kg/h inverts the ratio to 0.16 / 0.12.
Check every step: Mass balance calculator: mixing streams (flow, concentration, temperature), opened with this problem’s numbers
-
Actual flow of nitrogen from a normal flow rate
A nitrogen supply to a reactor is metered at 500 Nm³/h (0 °C and 101.325 kPa). In the line the gas is at 6.0 bar gauge and 40 °C, and atmospheric pressure is 101.325 kPa. Treating nitrogen as an ideal gas (Z = 1), what is the actual volume flow in the line?
Show the answer and worked solution
Answer: D, 82.8 m³/h
- Absolute line pressure: p = 600 + 101.325 = 701.3 kPa.
- Same number of moles, ideal gas: Q = Q_N × (p_N / p) × (T / T_N) = 500 × (101.325 / 701.3) × (313.15 / 273.15).
- Q = 500 × 0.1445 × 1.1464 = 82.8 m³/h.
- The traps: 96.8 m³/h uses the gauge pressure of 600 kPa as absolute, 72.2 m³/h corrects for pressure but not for temperature, and 78.5 m³/h takes the reference as 15 °C instead of 0 °C.
Check every step: Mass flow rate calculator (kg/h, m³/h, velocity, Nm³/h, SCFM), opened with this problem’s numbers
-
Hydrogen sulphide alarm level in mg/m³
A refinery sets a workplace alarm for hydrogen sulphide (H₂S, molar mass 34.08 g/mol) at 10 ppm by volume. The gas detector reports in mg/m³ at 25 °C and 101.325 kPa. Treating the air as an ideal gas, what alarm setting in mg/m³ corresponds to 10 ppmv?
Show the answer and worked solution
Answer: B, 13.9 mg/m³
- Molar volume at 25 °C and 101.325 kPa: V_m = R T / p = 8.314 × 298.15 / 101 325 = 0.02446 m³/mol = 24.46 L/mol.
- mg/m³ = ppmv × M / V_m = 10 × 34.08 / 24.46 = 13.9 mg/m³.
- The traps: 15.2 mg/m³ uses 22.41 L/mol, the molar volume at 0 °C; 7.2 mg/m³ inverts the ratio to ppmv × V_m / M; 11.8 mg/m³ uses the molar mass of air, 28.96 g/mol, instead of that of H₂S.
Check every step: PPM concentration converter (mg/L, % w/w, ppmv, mg/m³, mol/L), opened with this problem’s numbers
-
Density of a crude oil from its API gravity
A crude oil cargo is reported as 30.0 °API at 60 °F. Water at 60 °F has a density of 999.0 kg/m³. The terminal needs the density of the crude at 60 °F to convert the tank volume into mass. What is that density?
Show the answer and worked solution
Answer: A, 875 kg/m³
- Specific gravity 60/60 °F: SG = 141.5 / (°API + 131.5) = 141.5 / 161.5 = 0.8762.
- Density: ρ = SG × ρ_water = 0.8762 × 999.0 = 875 kg/m³.
- The traps: 766 kg/m³ swaps the constants to 131.5 / (°API + 141.5), 1393 kg/m³ subtracts the API gravity as 141.5 / (131.5 − 30), and 1140 kg/m³ divides the water density by SG instead of multiplying.
Check every step: Specific gravity calculator (SG, API gravity, Baumé), opened with this problem’s numbers
-
Density of propane vapour with the Pitzer correlation
Propane vapour leaves a heater at 2.0 MPa absolute and 420 K. For propane, Tc = 369.8 K, Pc = 4.248 MPa, the acentric factor ω = 0.152 and the molar mass is 44.10 g/mol. Using the Pitzer generalised second-virial correlation for the compressibility factor, what is the density of the vapour?
Show the answer and worked solution
Answer: C, 28.2 kg/m³
- Reduced conditions: Tr = 420 / 369.8 = 1.136 and Pr = 2.0 / 4.248 = 0.471.
- B0 = 0.083 − 0.422 / Tr^1.6 = −0.261 and B1 = 0.139 − 0.172 / Tr^4.2 = 0.038.
- Z = 1 + (B0 + ω B1) Pr / Tr = 1 + (−0.261 + 0.152 × 0.038) × 0.471 / 1.136 = 0.894.
- Density: ρ = p M / (Z R T) = 2.0 × 10⁶ × 0.0441 / (0.894 × 8.314 × 420) = 28.2 kg/m³.
- The traps: 25.3 kg/m³ is the ideal-gas density (Z = 1), 22.6 kg/m³ multiplies by Z instead of dividing, and 16.6 kg/m³ uses the gas constant of air, 287 J/(kg K), instead of R / M for propane.
Check every step: Gas compressibility factor Z calculator (natural gas and pure gases), opened with this problem’s numbers
-
Molality of a sulphuric acid solution
A laboratory prepares 1.50 mol/L sulphuric acid (H₂SO₄, 98.07 g/mol) for a titration. The solution has a density of 1.090 g/mL at 20 °C. What is the molality of the solution, in moles of H₂SO₄ per kilogram of water?
Show the answer and worked solution
Answer: D, 1.59 mol/kg
- Take 1 L of solution: it holds 1.50 mol of H₂SO₄, which is 1.50 × 98.07 = 147.1 g.
- Mass of solution: 1000 mL × 1.090 g/mL = 1090 g, so the water is 1090 − 147.1 = 942.9 g.
- Molality: b = 1.50 / 0.9429 = 1.59 mol/kg.
- The traps: 1.50 mol/kg takes molality as equal to molarity, 1.38 mol/kg divides the molarity by the density (1.50 / 1.090) and so counts the acid as solvent, and 3.18 mol/kg uses the normality, 2 equivalents per mole, as if it were moles.
Check every step: Molarity calculator (moles, mass, volume, normality), opened with this problem’s numbers
-
Gas oil needed to blend a heavy fuel down to 180 cSt
A fuel terminal must make 100 m³ of 180 cSt fuel oil by blending a 380 cSt heavy fuel (density 985 kg/m³) with a 4.0 cSt gas oil (density 855 kg/m³), all viscosities at 50 °C. Using the Refutas viscosity blending number, which blends by mass, what volume of gas oil is needed?
Show the answer and worked solution
Answer: B, 11.4 m³
- VBN = 14.534 ln(ln(ν + 0.8)) + 10.975 gives 36.88 for 380 cSt, 17.52 for 4.0 cSt and 34.93 for 180 cSt.
- Mass fraction of heavy fuel: w_A = (34.93 − 17.52) / (36.88 − 17.52) = 0.899, so the gas oil is 0.101 by mass.
- Volume fraction of gas oil: φ_B = (0.101 / 855) / (0.899 / 985 + 0.101 / 855) = 0.114.
- Gas oil volume: 0.114 × 100 = 11.4 m³.
- The traps: 53.2 m³ blends the viscosities linearly, (380 − 180) / (380 − 4); 10.1 m³ uses the mass fraction as a volume fraction; 88.6 m³ is the volume of heavy fuel, not of gas oil.
Check every step: Blending ratio calculator (two liquids to a target property), opened with this problem’s numbers
-
Hypochlorite dosing pump setting for a water works
A water works disinfects 250 m³/h of filtered water. The chlorine demand is 1.8 mg/L and the plant wants a free residual of 0.7 mg/L after contact. It doses sodium hypochlorite of 12.5 % w/v available chlorine (125 g/L) with a product density of 1200 kg/m³. What dosing pump setting is needed?
Show the answer and worked solution
Answer: A, 5.00 L/h
- Chlorine dose = demand + residual = 1.8 + 0.7 = 2.5 mg/L = 2.5 g/m³.
- Chlorine feed: 250 m³/h × 2.5 g/m³ = 625 g/h.
- Pump setting: 625 g/h ÷ 125 g/L = 5.00 L/h.
- The traps: 4.17 L/h reads 12.5 % as w/w (625 / 0.125 = 5.0 kg/h, then ÷ 1.2 kg/L), 1.40 L/h doses only the residual, and 3.60 L/h doses only the demand.
Check every step: Chemical dosing calculator (feed rate, pump setting, chlorine dose), opened with this problem’s numbers
Results are estimates. They do not replace the governing code, class or flag requirements, or a check by a competent person.