Skip to content
Engineering Bible

Results appear as you type. Use the arrow keys to move through them and Enter to open one.

Popular

↑ ↓ moveEnter openEsc close

Maritime and naval architecture formulas

The formulas behind the 74 maritime calculators, on one page you can print or save as a PDF. Each block lists its variables and standard; the heading opens the calculator, with its assumptions and a worked example.

Fuel, emissions and charter

Alternative fuel tank volume

Energy to carry:     E = m_ref × LCV_ref
Alternative mass:    m = E / (η_rel × LCV)
Volume:              V = m / ρ
Tank capacity:       V_tank = V / (filling limit − unpumpable)
Energy density:      LCV × ρ
  • η_rel — efficiency of the machinery on the alternative fuel relative to the reference fuel.

Boat fuel consumption calculator

Power and fuel flow:

P = P_rated × load      or      P = P_rated × (n / n_rated)³
ṁ = P × SFC,     Q = ṁ / ρ_fuel

Range and cost:

endurance = V_tank × (1 − reserve) / Q
range = endurance × speed,     fuel per mile = Q / speed
  • P_rated — rated power of all engines together; n — engine rpm
  • SFC — specific fuel consumption: 225 g/kWh for diesel, 300 g/kWh for four-stroke petrol by default
  • ρ_fuel — fuel density: 0.84 kg/L for diesel, 0.745 kg/L for petrol
  • 1 US gallon = 3.785 L

Bunker quantity and density correction

Volume correction factor (ASTM D1250-80 / ISO 91-1 Table 54B, reference 15 °C):

ΔT  = T − 15
α   = K₀ / ρ₁₅² + K₁ / ρ₁₅ (+ A)          thermal expansion coefficient at 15 °C, per °C
VCF = exp[ −α ΔT (1 + 0.8 α ΔT) ]
Product groupρ₁₅ range, kg/m³K₀K₁A
Gasolines610.6–770.35346.42280.43880
Transition zone770.35–787.522680.32060−0.00336312
Jet fuels787.52–838.31594.541800
Fuel oils (MGO, MDO, HFO)838.31–1163.5186.96960.48620

Quantities:

V₁₅          = V_obs × VCF
ρ_T          = ρ₁₅ × VCF                       density at the observed temperature
m_vacuo      = V₁₅ × ρ₁₅
m_air        = V₁₅ × (ρ₁₅ − 1.1 kg/m³)         commercial mass (ISO 91 / Table 56)
E            = m_air × LCV
m_reference  = E / 42.7 MJ/kg                  tonnes of ISO reference fuel
Cost         = price × m_air
BDN diff     = m_air − m_BDN
  • ρ₁₅ — density at 15 °C in vacuo (BDN); if the BDN states density in air, ρ_vacuo = ρ_air + 1.1 kg/m³
  • V_obs — volume from the tank tables at the observed temperature, corrected for trim and heel
  • LCV — lower calorific value, from the fuel analysis

Charter party performance claim

Good-weather speed:        V_gw = D_gw / T_gw − current
Good-weather consumption:  C_gw = F_gw / (T_gw / 24)
Allowed performance:       V_al = V_w − a_V,   C_al = C_w (1 + a_C)
Passage times:             T_gw = D / V_gw,    T_al = D / V_al
Time lost:                 T_gw − T_al
Over-consumption:          C_gw T_gw / 24 − C_al T_al / 24
Credits (gains):           time below D / (V_w + a_V),  fuel below C_w (1 − a_C) T_al / 24
Claim:                     time lost / 24 × hire + over-consumption × bunker price   (not below zero)
  • D — total distance of the passage; D_gw, T_gw, F_gw — distance, steaming time and fuel in good weather; a_V, a_C — "about" allowances on speed (knots) and consumption (fraction).

CII rating estimator

Attained CII (g CO₂ per capacity unit and nautical mile):

CII_attained = Σ(FC_j × C_F,j) × 10⁶ / (Capacity × D_t)
  • FC_j — mass of fuel j consumed in the calendar year, t
  • C_F,j — carbon factor of fuel j, t CO₂ / t fuel: HFO 3.114, LFO/VLSFO 3.151, MGO/MDO 3.206, LNG 2.750, LPG propane 3.000, methanol 1.375
  • Capacity — DWT for bulk carriers, gas and LNG carriers, tankers, container, general cargo, refrigerated and combination carriers; GT for ro-ro and passenger ships
  • D_t — distance travelled over ground in the year, nmi

Reference line (median 2019 performance of the ship type):

CII_ref = a × Capacity_ref^(−c)

with a and c from the table below. Capacity_ref is the ship's capacity except where the table caps or floors it.

Ship typeCapacity_refac
Bulk carrierDWT, capped at 279 00047450.622
Gas carrier ≥ 65 000 DWTDWT14405 × 10⁷2.071
Gas carrier < 65 000 DWTDWT81040.639
TankerDWT52470.610
Container shipDWT19840.489
General cargo ≥ 20 000 DWTDWT319480.792
General cargo < 20 000 DWTDWT5880.3885
Refrigerated cargo carrierDWT46000.557
Combination carrierDWT51190.622
LNG carrier ≥ 100 000 DWTDWT9.8270
LNG carrier 65 000–100 000 DWTDWT14479 × 10¹⁰2.673
LNG carrier < 65 000 DWT65 00014779 × 10¹⁰2.673
Ro-ro vehicle carrier ≥ 57 700 GT57 70036270.590
Ro-ro vehicle carrier 30 000–57 700 GTGT36270.590
Ro-ro vehicle carrier < 30 000 GTGT3300.329
Ro-ro cargo shipGT19670.485
Ro-ro passenger shipGT20230.460
Ro-ro passenger high-speed craftGT41960.460
Cruise passenger shipGT9300.383

Required CII:

CII_required = (1 − Z/100) × CII_ref
Year20232024202520262027202820292030
Z, %5791113.62516.2518.87521.5

Rating boundaries and rating:

A/B = exp(d1) × CII_required,  B/C = exp(d2) × …,  C/D = exp(d3) × …,  D/E = exp(d4) × …

Rating A below A/B, B up to B/C, C up to C/D, D up to D/E, E above. The exp(d) vectors are ship-type specific (bulk carrier 0.86 / 0.94 / 1.06 / 1.18; tanker 0.82 / 0.93 / 1.08 / 1.28; container 0.83 / 0.94 / 1.07 / 1.19; full table in calc.js).

Derived quantities:

CO₂ allowed for C = (C/D boundary) × Capacity × D_t / 10⁶
Margin to D [%] = (C/D boundary − CII_attained) / (C/D boundary) × 100

Energy-saving device payback

I = capex + off-hire days × hire
S = saving % × F × sea days                        fuel saved, t/yr
benefit_t = [S p (1 + e)^(t−1) + S C_F e_EUA s] (1 − δ)^(t−1) − M
NPV = −I + Σ benefit_t / (1 + i)^t,   IRR: NPV(IRR) = 0
simple payback = I / benefit_1,   discounted payback: Σ PV reaches I (interpolated)
CRF = i (1 + i)ⁿ / ((1 + i)ⁿ − 1),   levelized cost of saved fuel = (CRF × I + M) / S

p fuel price, e fuel escalation, C_F carbon factor, e_EUA allowance price, s ETS share, δ saving degradation, M maintenance, i discount rate, n life.

EU ETS and FuelEU Maritime

Scope (both regulations):

scope factor = share_intra-EEA & at berth + 0.5 × share_extra-EEA

FuelEU GHG intensity (Annex I, GWP₁₀₀: CH₄ 25, N₂O 298):

TtW_i = [(1 − C_slip,i)(Cf_CO2,i + 25 Cf_CH4,i + 298 Cf_N2O,i) + 25 C_slip,i] / LCV_i      [gCO₂e/MJ]
GHGIE = f_wind × Σ E_i (WtT_i + TtW_i) / Σ E_i,     E_i = M_i × LCV_i
limit(year) = 91.16 × (1 − r),  r = 2 % (2025), 6 % (2030), 14.5 % (2035), 31 % (2040), 62 % (2045), 80 % (2050)

Compliance balance and penalty (Annex IV):

CB = (limit − GHGIE) × E_scope                       [gCO₂e]
penalty = |CB| / (GHGIE × 41 000 MJ/t) × 2 400 EUR × (1 + (N − 1)/10)   when CB < 0

EU ETS:

CO₂e_i per gram = (1 − C_slip)(Cf_CO2 + 28 Cf_CH4 + 265 Cf_N2O) + 28 C_slip   (CO₂ only before 2026)
emissions in scope = Σ M_i × CO₂e_i × scope factor
allowances = emissions × phase-in (40 % for 2024, 70 % for 2025, 100 % from 2026),   cost = allowances × EUA price

Annex II defaults (LCV MJ/g; WtT gCO₂e/MJ; Cf CO₂ g/g; CH₄; N₂O; slip): HFO 0.0405 / 13.5 / 3.114 / 0.00005 / 0.00018; LFO 0.0410 / 13.2 / 3.151; MGO 0.0427 / 14.4 / 3.206; LNG 0.0491 / 18.5 / 2.750 / 0 / 0.00011 with slip 3.1 % (Otto MS), 1.7 % (Otto SS), 0.2 % (Diesel SS), 2.6 % (LBSI); LPG 0.046 / 7.8 / 3.00–3.03; methanol 0.0199 / 31.3 / 1.375.

Fuel blending and heating viscosity

Refutas blending (all viscosities at the same temperature, fractions by mass):

VBI_i = 14.534 ln(ln(ν_i + 0.8)) + 10.975
VBI_blend = w_A VBI_A + w_B VBI_B
ν_blend = exp(exp((VBI_blend − 10.975)/14.534)) − 0.8
fraction for a target: w_A = (VBI_target − VBI_B) / (VBI_A − VBI_B)

Ideal mixing:

1/ρ_blend = w_A/ρ_A + w_B/ρ_B        S_blend = w_A S_A + w_B S_B        volume fraction of A = (w_A/ρ_A) ρ_blend

Viscosity–temperature (ASTM D341, Walther, T in kelvin):

log10 log10(ν + 0.7) = A − B log10 T
A and B from two known points; T(ν_target) = 10^((A − log10 log10(ν_target + 0.7))/B)

Typical targets: injection 10–15 cSt (engine makers 12–14), transfer pumping ≤ 1 000 cSt, separator inlet ≈ 98 °C for residual fuels.

Fuel changeover before an ECA

Volume flow:               Q = consumption / density
Residence time:            τ = V_circuit / Q
Line delay:                V_line / Q
New fuel at the engines:   y = 1 − e^(−t/τ)   (switch at once)
Sulphur and temperature:   S = S_old − (S_old − S_new) y,   T = T_old − (T_old − T_new) y
Time to the limit:         delay + τ ln((S_old − S_new) / (S_limit − S_new))
Largest temperature rate:  (T_old − T_new) / τ   (switch at once)
  • With a linear blend over t_r, the new-fuel fraction follows the ramp response of the stirred volume and the largest rate is (T_old − T_new)(1 − e^(−t_r/τ)) / t_r.

Fuel consumption and voyage cost

Time at sea:

t_sea [days] = D / (V × 24)
  • D — voyage distance over ground, nautical miles (nmi)
  • V — average speed over ground, knots (1 knot = 1 nmi/h)

Main-engine daily consumption from power (basis "Engine power × SFOC"):

m_ME [t/day] = P × SFOC × 24 / 10⁶
  • P — main-engine brake power actually developed on passage, kW
  • SFOC — specific fuel oil consumption at that load, g/kWh

With a margin:

m_ME,used = m_ME × (1 + M / 100)
  • M — weather / fouling margin, %

Fuel quantities:

F_ME  = m_ME,used × t_sea
F_AUX = m_AUX × t_sea
F_PORT = m_PORT × t_port
F_total = F_ME + F_AUX + F_PORT
  • m_AUX — auxiliary consumption at sea (generators, boiler), t/day
  • m_PORT — consumption in port, t/day; t_port — time in port, days

Cost and emissions:

Cost = F_total × price            [currency, price in currency/t]
CO₂  = F_total × C_F              [t CO₂]
Fuel per mile = (F_ME + F_AUX) × 1000 / D     [kg/nmi]
  • C_F — carbon factor of the fuel, t CO₂ per t fuel (IMO MEPC.364(79) Table 1): HFO 3.114, VLSFO/LFO 3.151, MGO/MDO 3.206, LNG 2.750, LPG propane 3.000, LPG butane 3.030, methanol 1.375, ethanol 1.913.

Fuel net specific energy and CO₂ factor

Residual (H.1):   Q_net = (46.704 − 8.802 ρ²·10⁻⁶ + 3.167 ρ·10⁻³)[1 − 0.01(w_w + w_a + w_s)] + 0.0942 w_s − 0.02449 w_w
Distillate (H.3): Q_net = (46.423 − 8.792 ρ²·10⁻⁶ + 3.170 ρ·10⁻³)[1 − 0.01(w_w + w_a + w_s)] + 0.0942 w_s − 0.02449 w_w
Gross (H.2/H.4):  Q_gross = (52.190 − 8.802 ρ²·10⁻⁶)[…] + 0.0942 w_s   /   (51.916 − 8.792 ρ²·10⁻⁶)[…] + 0.0942 w_s
MJ/L = Q_net ρ15/1000,   C_F = w_C × 44.0095/12.011 (or IMO grade value),   g CO₂/MJ = C_F × 1000/Q_net
mass of this fuel per tonne of 42 700 kJ/kg reference fuel = 42 700/Q_net

ρ in kg/m³ at 15 °C, w in % m/m, Q in MJ/kg.

NOx tier limit by engine speed

Tier I   (built 2000–2010):          17.0 (n < 130) · 45 n^−0.2 (130 ≤ n < 2000) · 9.8 (n ≥ 2000)   g/kWh
Tier II  (built ≥ 2011, global):     14.4 · 44 n^−0.23 · 7.7
Tier III (in a NECA, built ≥ 2016 North America / ≥ 2021 Baltic & North Sea):  3.4 · 9 n^−0.2 · 2.0
margin = (limit − certified)/limit,   annual NOx [t] = P × load factor × hours × (g/kWh) / 10⁶

Optimal speed under charter

F(v) = F₀ (v/v₀)ⁿ,   sea days = D/(24 v),   p_eff = p + s C_F e_EUA
Time charter:    C(v) = H (D/24v + T_p) + p_eff F(v) D/24v
                 v* = v₀ [H / ((n − 1) p_eff F₀)]^(1/n)                       (Ronen)
Voyage charter:  Π(v) = [R − p_eff F(v) D/24v − c_op (D/24v + T_p)] / (D/24v + T_p)
                 numeric maximum within [v_min, v_max];
                 T_p = 0, c_op = 0:  v* = [24 R v₀ⁿ / (n p_eff F₀ D)]^(1/(n−1))

Hull, propulsion and performance

Added resistance in waves (STAwave-1)

R_AW = (1/16) ρ g H_1/3² B √(B / L_BWL)         ISO 15016:2025 Formula D.31
valid for wave direction ≤ 45° off the bow, small heave and pitch; otherwise no correction
ΔP = R_AW V_S / η_D,   share = ΔP / P_D

L_BWL is the distance from the bow to the point where the waterline reaches 95 % of the maximum breadth (Figure D.2); ρ from the ITTC sea-water table at the trial temperature.

Admiralty coefficient and speed–power scaling

Admiralty coefficient and fuel coefficient at the known point:

A_c = Δ₁^(2/3) V₁³ / P₁
F_c = Δ₁^(2/3) V₁³ / (fuel per day)₁

Scaling to a new condition (n = speed exponent, default 3):

P₂ = P₁ (Δ₂/Δ₁)^(2/3) (V₂/V₁)^n
V₂ = V₁ [ (P₂/P₁) (Δ₁/Δ₂)^(2/3) ]^(1/n)

Fuel at constant SFOC:

fuel per day [t/day] = P × SFOC × 24 / 10⁶
fuel per mile [kg/nmi] = P × SFOC / (1000 V)
  • Δ — displacement, t; V — speed, kn; P — shaft or brake power, kW; SFOC — specific fuel consumption, g/kWh

With n = 3 and constant displacement, fuel per day scales with V³ and fuel per mile with V².

Froude number calculator for ships and boats

Length, depth and volumetric Froude numbers:

Fn = V / √(g L)
Fn_h = V / √(g h),       critical speed V_crit = √(g h)
Fn_∇ = V / √(g ∇^(1/3))

Wave length of the ship's transverse waves in deep water:

λ = 2π V² / g           λ = L at Fn = 1/√(2π) = 0.40
  • V — speed through the water in m/s (1 kn = 0.5144 m/s); g = 9.81 m/s²
  • L — waterline length; h — water depth; ∇ — displacement volume
  • Depth regimes (SVA Potsdam): subcritical Fn_h < 0.9, critical 0.9 to 1.1, supercritical above 1.1
  • Fast craft (Savitsky): displacement Fn_∇ < 1, semi-planing 1 to 3, planing above 3

Holtrop–Mennen resistance and power

Total resistance and powers:

R_T = R_F (1 + k1) + R_APP + R_W + R_B + R_TR + R_A
P_E = R_T V,    P_D = P_E / (η_H η_R η_O),    P_S = P_D / η_S,    η_H = (1 − t)/(1 − w)

Friction and form (ITTC-1957):

Rn = V L / ν,   C_F = 0.075 / (log10 Rn − 2)²,   R_F = ½ ρ V² S C_F
S = L (2T + B) √C_M (0.453 + 0.4425 C_B − 0.2862 C_M − 0.003467 B/T + 0.3696 C_WP) + 2.38 A_BT / C_B
1982:  1 + k1 = c13 {0.93 + c12 (B/L_R)^0.92497 (0.95 − C_P)^−0.521448 (1 − C_P + 0.0225 lcb)^0.6906},  c13 = 1 + 0.003 C_stern
1984:  1 + k1 = 0.93 + 0.487118 c14 (B/L)^1.06806 (T/L)^0.46106 (L/L_R)^0.121563 (L³/∇)^0.36486 (1 − C_P)^−0.604247,  c14 = 1 + 0.011 C_stern
L_R = L (1 − C_P + 0.06 C_P lcb / (4 C_P − 1))

Appendages: R_APP = ½ ρ V² S_APP (1 + k2) C_F (+ bow-thruster ρ V² π d² C_BTO).

Wave resistance (Fn ≤ 0.40):

R_W = c1 c2 c5 ∇ ρ g exp[m1 Fn^d + m_hump cos(λ Fn⁻²)],  d = −0.9
c1 = 2223105 c7^3.78613 (T/B)^1.07961 (90 − i_E)^−1.37565,  c2 = exp(−1.89 √c3),  c5 = 1 − 0.8 A_T/(B T C_M)
m1 = 0.0140407 L/T − 1.75254 ∇^(1/3)/L − 4.79323 B/L − c16,  λ = 1.446 C_P − 0.03 L/B
1982: m_hump = m2 = c15 C_P² exp(−0.1 Fn⁻²);   1984: m_hump = m4 = 0.4 c15 exp(−0.034 Fn^−3.29)
1984, Fn ≥ 0.55: R_W-B with c17 = 6919.3 C_M^−1.3346 (∇/L³)^2.00977 (L/B − 2)^1.40692 and m3 = −7.2035 (B/L)^0.326869 (T/B)^0.605375; linear interpolation for 0.40 < Fn < 0.55

Bulb, transom, correlation:

R_B = 0.11 exp(−3 P_B⁻²) Fn_i³ A_BT^1.5 ρ g / (1 + Fn_i²),  P_B = 0.56 √A_BT / (T_F − 1.5 h_B)
R_TR = ½ ρ V² A_T c6,  c6 = 0.2 (1 − 0.2 Fn_T) for Fn_T < 5
C_A = 0.006 (L + 100)^−0.16 − 0.00205 + 0.003 √(L/7.5) C_B⁴ c2 (0.04 − c4)  (+ roughness term above 150 µm)

Propulsion factors (single screw, conventional stern): wake and thrust deduction regressions of the chosen variant; η_R = 0.9922 − 0.05908 A_E/A_0 + 0.07424 (C_P − 0.0225 lcb). Twin screw: 1982 formulas.

Powering:

T = R_T / (1 − t)                    required thrust (a twin-screw ship splits it equally: T/2 per propeller)
V_A = V (1 − w)                      speed of advance
η_D = η_H η_R η_O = P_E / P_D        quasi-propulsive efficiency,  η_H = (1 − t)/(1 − w)
P_D = P_E / η_D,  P_S = P_D / η_S    delivered and shaft power
T_mean = (T_F + T_A) / 2             mean draft used by the formulas

Hull roughness and fouling penalty

Re = V L_PP / ν,   C_F = 0.075 / (log₁₀ Re − 2)²                       ITTC-57
ΔC_F = 0.044 [(k_s/L)^(1/3) − 10 Re^(−1/3)] + 0.000125   (min 0)       ISO 15016:2025 E.7 / G.8
ΔC_F = [105 (k_s/L)^(1/3) − 0.64] × 10⁻³                 (min 0)       1978 ITTC form
R_V,clean = (1 + k) C_F ½ρSV²,   ΔR = ½ρSV² [ΔC_F(k_s,present) − ΔC_F(k_s,clean)]
R_T = P_D η_D / V   (or R_V,clean / viscous share),   ΔP/P = ΔR / R_T
ΔV/V = 1 − (1 + ΔP/P)^(−1/3),   fuel = ΔP × SFOC × 24 h

Schultz (2007) equivalent roughness: as-applied coating 150 µm, deteriorated coating or light slime 300, heavy slime 600, small calcareous fouling or weed 1 000, medium calcareous 3 000, heavy calcareous 10 000 µm.

Hull speed calculator

Hull speed and speed–length ratio:

V_hull = 1.34 √LWL[ft]  kn  =  2.43 √LWL[m]  kn
S/L = V[kn] / √LWL[ft]

Froude number and wave length:

Fn = V / √(g LWL) = 0.298 × S/L
λ = 2π V² / g          (λ = LWL at S/L 1.34, Fn 0.40)

Gerr's maximum speed–length ratio for semi-displacement hulls:

D/L = Δ[long tons] / (0.01 LWL[ft])³
S/L_max = 8.26 / (D/L)^0.311
  • LWL — waterline length; V — speed through the water; g = 9.81 m/s²
  • Δ — displacement; one long ton is 2 240 lb (1 016 kg)
  • Regimes after Gerr: displacement up to S/L 1.34, semi-displacement from 1.45 to 3.0, planing above 3.0

Optimal hull cleaning interval

c₁ = F × d × (p + s C_F e) / 100          cost per month of a 1 % penalty
C  = cleaning cost + off-hire days × hire
A(T) = C/T + c₁ p₀ + c₁ r T/2              average monthly cost of a T-month cycle
T*  = √( 2C / (c₁ r) ),   A(T*) = c₁ p₀ + √(2 C c₁ r)
fuel wasted per year = F d 12 (p₀ + r T/2)/100

F clean consumption at sea (t/day), d sea days per month, p fuel price, e allowance price per t CO₂, C_F carbon factor, s ETS share, p₀ residual penalty after cleaning (%), r penalty growth (% per month).

Planing boat speed calculator (Crouch formula)

Crouch's planing formula and its inverse:

V = C / √(W / P)          V in kn, W in lb, P in shp
P = W × (V / C)²

The same in metric units:

V = 0.780 × C × √(P[kW] / W[kg])

Crouch constants C (Gerr):

  • 150 — average runabouts, cruisers and passenger vessels
  • 190 — high-speed runabouts and very light high-speed cruisers
  • 210 — race boats
  • 220 — three-point and stepped hydroplanes
  • 230 — racing power catamarans and sea sleds

Propeller curve and light running margin

Propeller law:               P = c n³
SMCR power (eq. 2.01.01):    P_M = P_PD (100 + SM) / (100 − EM)
SMCR speed (eq. 2.01.02):    n_M = n_PD (P_M / P_PD)^(1/3) (1 − LRM/100)
Light curve (line 6):        n_light(P) = n_PD (P / P_PD)^(1/3)
Layout curve (lines 1, 2):   n_layout(P) = n_M (P / P_M)^(1/3)
Service point:               P_SP = P_M (1 − EM/100) on the layout curve
Heavy running:               1 − n / n_light(P)
Margin to the layout curve:  n / n_layout(P) − 1
  • PD — propeller design point (design speed, clean hull, calm weather); SM, EM, LRM — sea, engine and light running margins in percent.

Propeller pitch and boat speed calculator

Propeller rpm and theoretical speed:

n_prop = n_engine / gear ratio
V_theory = pitch × n_prop × 60 / 1 852       kn, pitch in m
V_theory = pitch[in] × n_prop / 1 215.2      kn
V_theory = pitch[in] × n_prop / 1 056        mph

Speed, pitch and slip:

V = V_theory × (1 − slip)
pitch = V / ((1 − slip) × n_prop)
slip = 1 − V_measured / V_theory
  • pitch — the nominal pitch, the second number on the propeller (14 × 19 means 19 in of pitch)
  • gear ratio — engine turns per propeller turn, from the engine manual (2.0:1 halves the rpm)
  • slip — apparent slip, as a fraction or percentage

Propeller slip and speed through water

Theoretical (engine) speed:

Vₜ [kn] = P × N × 60 / 1852
  • P — propeller pitch, m (mean face pitch)
  • N — propeller revolutions per minute
  • 1852 — metres per nautical mile, 60 — minutes per hour

Apparent slip (against observed speed over ground V):

S_A [%] = (Vₜ − V) / Vₜ × 100

Speed through water (STW) with a current c along the track (positive following):

STW = V − c

Slip through water:

S_W [%] = (Vₜ − STW) / Vₜ × 100

Speed of advance and real slip, with Taylor wake fraction w:

Vₐ = STW × (1 − w)
S_R [%] = (Vₜ − Vₐ) / Vₜ × 100

Ship speed from an assumed apparent slip:

V = Vₜ × (1 − S_A / 100)

Engine-log quantities:

Engine distance per day   = Vₜ × 24      [nmi]
Observed distance per day = V × 24       [nmi]
Revolutions per mile      = N × 60 / V

Rotor sail (Flettner rotor) thrust and saving

Wind profile:        TWS(z) = TWS₁₀ (z / 10)^α
Apparent wind:       AWS, AWA from TWS(z), TWA and the ship speed V_s
Spin ratio:          SR = ω R / AWS
Lift and drag:       L = c_L(SR) ½ ρ A AWS²,   D = c_D(SR) ½ ρ A AWS²
Thrust:              T = L sin AWA − D cos AWA
Side force:          S = L cos AWA + D sin AWA
Spin power:          P_rotor = c_P(SR) ½ ρ A AWS³
Net power (eq. 10):  P_net = T V_s − P_rotor
Engine saving:       ≈ T V_s / η_D
  • c_L, c_D, c_P — fifth-order polynomials in SR (Tillig & Ringsberg 2020, eqs 7–9); A = D H, the projected area of each height strip; AWA from the bow.

Shallow water correction (Raven / Lackenby)

h_min = max(2.5 T_M, 2.4 V_S²/g)                                     Formula (7)
Fr_h = V_S/√(g h),   Fr_hd = V_S/√(0.3 g L_PP)                        G.13
d = 1.46 ∇/L_PP² [Fr_h²/√(1−Fr_h²) − Fr_hd²/√(1−Fr_hd²)] ≥ 0        G.12
δ = d A_W/∇ (≤ 0.05),   r_sink = (1 + δ)^(2/3)                        G.10–G.11
(1+k) = 1.017 + 20 C_B (B/L_PP)² (T_M/B)^0.5                           G.9
C_V' = 1.06 C_F (1+k) + ΔC_F,   R_Vdeep = C_V' ½ρV_S²S                 G.4–G.8
R_SHV = R_Vdeep × 0.57 (T_M/h)^1.79                                    G.3
P_Ddeep = (P_Dmsc − R_SHV V_S/η_Did)/r_sink,   P_SH = P_Dmsc − P_Ddeep  G.1–G.2
Lackenby: ΔV/V = 0.1242 (A_M/h² − 0.05) + 1 − √tanh(g h/V²),  V_deep = V (1 + ΔV/V)

Speed–power curve fit

Power law:             P = a Vⁿ
Fit:                   ln P = ln a + n ln V   (least squares)
Inverse:               V(P) = (P / a)^(1/n)
Power increase:        (P_fit(V) − P_ref(V)) / P_ref(V)
Speed difference:      (V_fit(P) − V_ref(P)) / V_ref(P)
Performance value:     PV = (V_measured − V_ref(P_measured)) / V_ref(P_measured)   (ISO 19030-2)

Wageningen B-series propeller

Open-water coefficients (Rn = 2·10⁶):

KT = Σ C_s,t,u,v J^s (P/D)^t (A_E/A_0)^u Z^v   (39 terms)
KQ = Σ C_s,t,u,v J^s (P/D)^t (A_E/A_0)^u Z^v   (47 terms)
J = V_A / (n D),   η_O = J KT / (2π KQ)
T = KT ρ n² D⁴,   Q = KQ ρ n² D⁵,   P_D = 2π n Q,   P_T = T V_A

Full-scale correction (ITTC-1978, as in Holtrop & Mennen 1982):

c_0.75 = 2.073 (A_E/A_0) D / Z,   t/c = (0.0185 − 0.00125 Z) D / c_0.75
ΔC_D = (2 + 4 t/c) [0.003605 − (1.89 + 1.62 log10(c_0.75 / k_p))^−2.5],   k_p = 30 µm
KT_ship = KT + 0.3 ΔC_D (P/D) c Z / D,   KQ_ship = KQ − 0.25 ΔC_D c Z / D

Design for a required thrust T at diameter D and speed of advance V_A:

K = T / (ρ V_A² D²),   operating point: KT(J) = K J²   (solved for J at each P/D)
choose the P/D with the highest η_O;   n = V_A / (J D)

Keller cavitation screen:

A_E/A_0 ≥ K_keller + (1.3 + 0.3 Z) T / (D² (p_0 − p_v + ρ g h)),   p_0 − p_v = 99 047 Pa (15 °C sea water)

Wind resistance (ISO 15016)

Resistance increase (C.1):  R_AA = ½ ρ_A C_AA(ψ) A_XV V_WR² − ½ ρ_A C_AA(0) A_XV V_G²
Air density (C.2):          ρ_A = p_A / (2.8705 (t_A + 273.15)),  p_A in hPa
Fujiwara (C.12):            C_AA(ψ) = C_LF cos ψ + C_XLI (sin ψ − ½ sin ψ cos²ψ) sin ψ cos ψ + C_ALF sin ψ cos³ψ
Head-wind branch:           C_LF, C_XLI, C_ALF from A_LV/(L_OA B), C_MC/L_OA, A_LV/(L_OA H_BR), A_XV/(B H_BR), A_OD/A_LV, B/L_OA
Following branch:           from B/L_OA, H_C/L_OA, A_OD/L_OA², A_XV/B², A_LV/(L_OA H_BR), A_XV/A_LV, A_XV/(B H_BR), A_OD/A_LV
Beam wind (C.19):           C_AA(90°) = ½ [C_AA(80°) + C_AA(100°)]
Added power:                P = R_AA V_G / η_D
  • V_WR, ψ — relative wind speed and direction at 10 m; V_G — speed over ground; A_XV, A_LV — transverse and lateral projected areas above the waterline; A_OD — lateral area of superstructures; C_MC — centre of A_LV from amidships; H_BR — height of the top of the superstructure; H_C — height of the centre of A_LV.

Stability, loading and draft

Air draft and bridge clearance

Clearance above water   = charted clearance + (clearance datum − chart datum) − height of tide
Draft at the mast       = T_aft + (T_fwd − T_aft) · x / L_BP
Air draft               = height of the highest point above the keel − draft at the mast (− squat credit)
Gross clearance         = clearance above water − air draft
Net margin              = gross clearance − motion allowance − electrical safety distance
Highest permissible tide = charted clearance + datum − air draft − allowances − required margin
  • x — position of the highest point forward of the aft perpendicular; L_BP — length between perpendiculars.

Bilged compartment (lost buoyancy)

Lost volume:            v = μ l b d
Intact waterplane:      A' = L B − μ l b
Parallel sinkage:       s = v / A'
New KB:                 KB' = d/2 + v (d + s) / (2 V)
Transverse inertia:     I_T' = L B³/12 − μ l b³/12,   BM' = I_T' / V
GM after bilging:       GM' = KB' + BM' − KG
Centre of flotation:    x_F = −μ l b x / A'
Longitudinal inertia:   I_L' = B L³/12 − μ b l³/12 − μ l b x² − A' x_F²
Trim:                   tan τ = v (x − x_F) / I_L'
End drafts:             T_F = d + s + tan τ (L/2 − x_F),   T_A = d + s − tan τ (L/2 + x_F)
  • μ — permeability; l, b — compartment length and breadth; x — compartment centre from amidships, positive forward; V = L B d.

Block coefficient and hull form coefficients

Form coefficients:

C_B = ∇ / (L B T)
C_M = A_M / (B T)
C_P = ∇ / (A_M L) = C_B / C_M
C_WP = A_WP / (L B)
C_VP = ∇ / (A_WP T) = C_B / C_WP

Displacement and tonnes per centimetre:

Δ = C_B L B T ρ,     TPC = A_WP ρ / 100
  • L — length between perpendiculars or on the waterline; B — moulded breadth; T — moulded draught
  • ∇ — displacement volume; A_M — midship section area below the waterline; A_WP — waterplane area
  • ρ — water density: 1.025 t/m³ for salt water, 1.000 t/m³ for fresh water

Buoyancy calculator (Archimedes)

Archimedes' principle:

F_B = ρ g V
floats when m < ρ V,     share under water = m / (ρ V)

Draught of n identical floats carrying a total mass m:

box:                  T = m / (ρ n L B)
upright cylinder:     T = m / (ρ n π D² / 4)
horizontal cylinder:  ρ n L A(T) = m
A(T) = r² acos((r − T) / r) − (r − T) √(2 r T − T²)

Payload to a freeboard f, for floats of height H:

m_max = ρ n × (volume immersed to H − f)
  • ρ — water density: 1 000 kg/m³ fresh, 1 025 kg/m³ sea; g = 9.81 m/s²
  • V — volume of the body; r = D/2 — radius of a cylinder; A — submerged segment area

Change of trim and new drafts calculator

Bodily sinkage and change of trim:

sinkage = w / TPC                         cm
change of trim = w × d / MCTC             cm

Share of the trim at each end (LCF measured from the aft perpendicular):

change aft = change of trim × LCF / L
change forward = change of trim × (L − LCF) / L

Loading position for an unchanged aft draft:

d = MCTC × L / (TPC × LCF)     forward of the LCF
  • w — weight in tonnes; d — its lever about the LCF in metres (for a shift, the distance moved)
  • TPC — tonnes per centimetre immersion; MCTC — moment to change trim 1 cm, t·m/cm
  • L — length between perpendiculars; trim is positive by the stern

Draft survey

Mean drafts at the marks:

F = (F_port + F_stbd) / 2,   M = …,   A = …

Correction to the perpendiculars (apparent trim t_a = A − F; LBM = LBP − d_F − d_A):

F_FP = F − d_F × t_a / LBM         d_F: forward marks aft of the FP
A_AP = A + d_A × t_a / LBM         d_A: aft marks forward of the AP
M_⊗  = M − d_M × t_a / LBM         d_M: midship marks aft of midships
True trim t = A_AP − F_FP          (+ by the stern)
Hog/sag = M_⊗ − (F_FP + A_AP) / 2  (+ sag)

Quarter-mean draft for the tables:

D_qm = (F_FP + A_AP + 6 M_⊗) / 8

Trim corrections (tonnes), with Δ_table, TPC, LCF and MCTC read at D_qm:

First (LCF layer):  FTC = t[cm] × LCF[m, + fwd] × TPC / LBP, sign such that FTC > 0 when the LCF is towards the deeper end
                    (in this calculator: FTC = −t × LCF_fwd × TPC / LBP)
Second (Nemoto):    STC = 50 × t[m]² × (MCTC₊₅₀ − MCTC₋₅₀) / LBP     (always positive)
Δ_trim = Δ_table + FTC + STC

Density correction:

Δ_corr = Δ_trim × ρ_dock / ρ_table

Cargo:

Deductibles = ballast + fresh water + fuel oil + diesel + lube oil + others
Net = Δ_corr − deductibles − lightship       (= cargo + constant)
Cargo = Net − constant                        (at the initial survey with no cargo, Net is the constant)

Dry-docking critical instant

Trim:              t = (T_aft − T_fwd) × 100   (cm)
Upthrust:          P = MCTC × t / l
Method 1:          loss of GM = P × KM / W
Method 2:          loss of GM = P × KG / (W − P),  with KM at the critical-instant draft
Draft at the LCF:  T_LCF = T_aft + (T_fwd − T_aft) × LCF / L_BP
Critical instant:  even-keel draft = T_LCF − P / TPC
Largest trim:      P_max = W (GM − GM_required) / KM,   t_max = P_max × l / MCTC
  • l — distance from the first point of contact (aft end of the keel) to the LCF; W — displacement.

Gross and net tonnage calculator (ITC 1969)

Gross tonnage (regulation 3):

GT = K1 V,      K1 = 0.2 + 0.02 log10 V

Net tonnage (regulation 4):

NT = K2 Vc (4d / 3D)² + K3 (N1 + N2 / 10)
K2 = 0.2 + 0.02 log10 Vc,      K3 = 1.25 (GT + 10 000) / 10 000

Limits of regulation 4(1):

(4d / 3D)² ≤ 1,      K2 Vc (4d / 3D)² ≥ 0.25 GT,      NT ≥ 0.30 GT
N1 = N2 = 0 when N1 + N2 < 13
  • V — total volume of all enclosed spaces, m³; Vc — total volume of cargo spaces, m³
  • D — moulded depth amidships; d — moulded draught amidships as regulation 4(2) defines it
  • N1 — passengers in cabins with not more than 8 berths; N2 — other passengers

GZ curve and intact stability criteria

Areas:          A(θ₁, θ₂) = ∫ GZ dθ   (θ in radians, monotone cubic through the points)
General (2.2):  A(0,30°) ≥ 0.055, A(0,40° or θf) ≥ 0.090, A(30°,40° or θf) ≥ 0.030 m·rad
                GZ ≥ 0.20 m at θ ≥ 30°,  θ(GZmax) ≥ 25°,  GM0 ≥ 0.15 m
Weather (2.3):  lw1 = P A Z / (1000 g Δ),  lw2 = 1.5 lw1,  P = 504 Pa
                θ0 (GZ = lw1) ≤ min(16°, 0.8 θ_deck edge)
                θ1 = 109 k X1 X2 √(r s),  r = 0.73 + 0.6 (KG − d)/d
                T = 2 C B / √GM,  C = 0.373 + 0.023 B/d − 0.043 Lwl/100
                area b (lw2 intercept to θ2 = min(θf, 50°, θc)) ≥ area a (θ0 − θ1 to the lw2 intercept)
Grain (A 7):    λ0 = M_v / (SF Δ),  λ40 = 0.8 λ0
                heel ≤ 12° (or deck-edge immersion),  residual area ≥ 0.075 m·rad,  GM0 ≥ 0.30 m

Hydrostatics basics

Volume and displacement:

∇ = L × B × T × C_B                [m³]
Δ = ∇ × ρ                          [t]
  • L — length between perpendiculars, m
  • B — moulded breadth, m
  • T — draft at the longitudinal centre of flotation (even-keel mean draft), m
  • C_B — block coefficient at this draft
  • ρ — water density, t/m³ (sea water 1.025, fresh water 1.000)

Waterplane area and TPC:

A_W = L × B × C_W                  [m²]
TPC = A_W × ρ / 100                [t/cm]
  • C_W — waterplane-area coefficient

Fresh water allowance and dock water allowance:

FWA = Δ / (4 × TPC_SW)             [mm]
DWA = FWA × (1025 − ρ_DW × 1000) / 25   [mm]
  • TPC_SW — TPC in sea water of 1.025 t/m³
  • ρ_DW — dock water density, t/m³

Trim:

Trimming moment = Δ × (LCB − LCG)  [t·m]   (positive = by the stern)
Trim = Trimming moment / MCTC      [cm]
Draft aft     = T + Trim/100 × LCF / L
Draft forward = T − Trim/100 × (L − LCF) / L
  • LCB, LCG, LCF — longitudinal centres of buoyancy, gravity and flotation, measured from the aft perpendicular, positive forward, m
  • MCTC — moment to change trim 1 cm, t·m/cm, from the hydrostatic tables, or estimated with Barrass's rule MCTC ≈ 7.31 × TPC² / B

Inclining experiment

Tangent of heel:     tan θ = deflection / pendulum length   (mean of the pendulums)
Fit:                 tan θ = a + b · W·x   (least squares, not forced through the origin)
Metacentric height:  GM = 1 / (Δ · b)
Centre of gravity:   KG_fluid = KM − GM;   KG = KG_fluid − FSM / Δ
Lightship:           Δ_L = Δ + Σ w;   KG_L = (Δ · KG + Σ w · VCG) / Δ_L
  • W·x — cumulative heeling moment of the weight movements; Δ — displacement at the test; FSM — free-surface moment of slack tanks; w — survey items, positive to add and negative to remove.

Initial stability GM and list

Metacentric height and free surface:

GM_solid = KM − KG
FSM      = Σ (l b³ / 12) × ρ_liquid / n²        free surface moment of a rectangular slack tank, t·m
FSC      = FSM / Δ                               free surface correction (virtual rise of G), m
GM_fluid = GM_solid − FSC

Weight operations (w tonnes, Kg its height above keel, d its transverse distance from the centreline, + starboard):

Shift:      KG′ = KG + w × d_vertical / Δ,          heeling moment = w × d,       Δ′ = Δ
Load:       KG′ = (Δ KG + w Kg) / (Δ + w),          heeling moment = w × d,       Δ′ = Δ + w
Discharge:  KG′ = (Δ KG − w Kg) / (Δ − w),          heeling moment = −w × d,      Δ′ = Δ − w
GM′_fluid = KM − KG′ − FSM / Δ′

List:

tan θ = heeling moment / (Δ′ × GM′_fluid)

Rolling period (IMO 2008 IS Code weather criterion):

C = 0.373 + 0.023 (B/d) − 0.043 (L_wl / 100)
T = 2 C B / √GM_fluid

IMO minimum: GM_fluid ≥ 0.15 m (2008 IS Code Part A 2.2.4).

  • KM — height of the transverse metacentre above keel at the present draft (hydrostatic tables)
  • KG — height of the centre of gravity above keel (loading computer / stability booklet)
  • l, b — length and breadth of the free liquid surface; n — number of equal longitudinal subdivisions

Loading condition from an item list

Displacement:        Δ = Σ w
Centres:             KG = Σ w·VCG / Δ,  LCG = Σ w·LCG / Δ,  TCG = Σ w·TCG / Δ
Free surface:        FSC = Σ FSM / Δ,   KG_fluid = KG + FSC
Metacentric height:  GM = KM − KG_fluid
Trim (by the stern): t = Δ (LCB − LCG) / (100 MCTC)
Drafts:              T_aft = T + t · x_F / L,   T_fwd = T − t · (L − x_F) / L
List:                tan φ = TCG / GM
  • KM, LCB, LCF (x_F), MCTC and the draft T at the LCF are interpolated in the hydrostatic table by displacement.

Roll period and synchronous rolling

Natural roll period (IS Code 2008 §2.3.4):

T_R = 2 C B / √GM,    C = 0.373 + 0.023 (B/d) − 0.043 (L_WL / 100)
inverse (rolling test):  GM = (2 C B / T_R)²

Waves and encounter (Circ.1228 §1.5–1.6, deep water):

λ = 1.56 T_W²  [m],   T_W = 0.8 √λ  [s]
T_E = 3 T_W² / (3 T_W + V cos α)   with V in knots, α = 0° head seas, 90° beam, 180° following

Checks (Circ.1228 §4.2):

synchronous rolling:   T_E ≈ T_R   (flagged within ±10 %, caution within ±20 %)
parametric rolling:    T_E ≈ T_R or T_E ≈ 0.5 T_R, with λ/L between 0.6 and 2.3
surf-riding:           135° < α < 225° and V > 1.8 √L / cos(180° − α)  (marginal above 1.4 √L / cos(180° − α))
high-wave attack:      λ > 0.8 L, H_s > 0.04 L and 1.8 ≤ T_E/T_W ≤ 3.0

Ship squat and under-keel clearance

Blockage factor and width of influence:

Open water:      F_B = 7.7 + 20 (1 − C_B)²,   W_eff = F_B × B,   S = T / (F_B h)
Confined:        W_eff = W (channel width at the bed),             S = B T / (W h)

Barrass general squat (metres, V in knots through the water):

S_max = C_B × S^0.81 × V^2.08 / 20

Simplified rules (h/T 1.1–1.4):

Open water:   S_max ≈ C_B V² / 100
Confined:     S_max ≈ C_B S^(2/3) V^2.08 / 20

Where the squat occurs: by the bow for C_B > 0.70, by the stern for C_B < 0.70, bodily for C_B ≈ 0.70.

Froude depth number:

F_nh = V / √(g h)        (V in m/s)

Under-keel clearance:

UKC_static = h − T
UKC_net    = h − T − S_max − allowances
UKC_req    = (required % / 100) × T
Margin     = UKC_net − UKC_req
V_max      = [ 20 (h − T − allowances − UKC_req) / (C_B S^0.81) ]^(1/2.08)
  • C_B — block coefficient at the actual draft; B — beam; T — static draft; h — water depth (charted depth + height of tide); W — channel width; g = 9.80665 m/s²

Tank sounding trim and heel correction

depth at pipe = sounding   (or H − ullage)
trim correction = (L/2 − x_p) × trim / L_BP          (+ when the pipe is aft of centre and the ship trims by the stern)
heel correction = y_p × tan(heel)                     (+ when the pipe is on the low side)
mean depth = depth at pipe − trim correction − heel correction
surface range = mean ± (L/2)|trim/L_BP| ± (B/2)|tan heel|   → must stay within [0, H]
volume = L B × mean depth,   mass = volume × density

Water temperature and density correction

R_AS = R_Tref (ρ_act/ρ_ref − 1) − R_Fact [(C_Fref + ΔC_Fref)/(C_Fact + ΔC_Fact) − 1]     E.1
R_Fact = ½ ρ_act S V_S² (C_Fact + ΔC_Fact)                                                E.2
R_Tref = P_ref η_D / V_S                                                                   E.4
C_F = 0.075/(log₁₀ Re − 2)²,  Re = V_S L_PP/ν                                              E.5–E.6
ΔC_F = 0.044 [(k_s/L_PP)^(1/3) − 10 Re^(−1/3)] + 0.000125  (min 0, k_s 150 µm default)    E.7
ΔP_AS = R_AS V_S/η_D,   P_ref = P_measured − ΔP_AS

Reference: 15 °C, ρ_ref 1026.0 kg/m³, ν_ref 1.1883 × 10⁻⁶ m²/s. Water properties from the ITTC 35 g/kg table.

Compass error by amplitude or azimuth

Azimuth at true altitude h:  cos Z = (sin Dec − sin Lat sin h) / (cos Lat cos h)
Amplitude (h = 0):           sin A = sin Dec / cos Lat,   A = 90° − Z
Bearing:                     rising Zn = Z,   setting Zn = 360° − Z
Visible horizon:             h = −(dip + R),  dip = 1.76′ √(height of eye, m),  R from Bennett's formula
Time azimuth:                Zn = atan2(−cos Dec sin LHA, sin Dec cos Lat − cos Dec sin Lat cos LHA)
Hour angle:                  LHA = GHA + longitude (east positive)
Compass error:               CE = true − compass (east positive)
Deviation:                   dev = CE − variation

Course to steer with set and drift

C − T = current direction relative to the track
cross = D sin(C − T)   (+ sets the ship to starboard),   along = D cos(C − T)   (+ following)
sin δ = cross / S,   course to steer = T − δ   (+ leeway angle)
SOG = S cos δ + along,   time = distance / SOG
ignoring the current: CMG, SMG from the vector sum of S on T and D on C; cross-track error = |cross| × distance/S

Set is the direction the current flows towards; all directions true.

CPA and TCPA from radar plots

Target position from own ship:    P = R (sin B, cos B)        x east, y north, nmi
Relative velocity (two plots):    V_r = (P₂ − P₁) / Δt
Own velocity:                     V_o = S_o (sin C_o, cos C_o)
Target true velocity:             V_t = V_r + V_o     (course = atan2(x, y), speed = |V_t|)
Time to CPA:                      TCPA = −(P · V_r) / |V_r|²
Closest point of approach:        CPA = |P + V_r · TCPA|
Bow crossing:                     the point where P + V_r t meets own heading line; BCR = its distance ahead
Aspect:                           (B + 180°) − C_t, red to port, green to starboard
Range rate:                       (P · V_r) / R
  • B, R — true bearing and range of the target; C_o, S_o — own course and speed; Δt — time between the plots.

ETA calculator with time zones

Passage time and arrival:

t = Σ (d_i / V_i) + stops
UTC_departure = local_departure − offset_departure
UTC_arrival = UTC_departure + t
local_arrival = UTC_arrival + offset_arrival

Clock change on the way:

Δclock = offset_arrival − offset_departure       (+ = clocks advanced)
  • d_i, V_i — distance and speed over the ground of each leg
  • offset — hours from UTC, east positive: UTC+9 is 9, UTC−5 is −5, India 5.5
  • A net change of more than 12 hours means the shorter route crosses the date line: eastbound the date is repeated, westbound a day is skipped

Great-circle and rhumb-line distance

Great circle on a sphere of radius R (φ latitude, λ longitude, Δλ = λ₂ − λ₁ normalised to ±180°):

haversine: a = sin²(Δφ/2) + cos φ₁ cos φ₂ sin²(Δλ/2),   σ = 2 atan2(√a, √(1−a))
D_gc = R σ
Initial course  C₁ = atan2( sin Δλ cos φ₂ , cos φ₁ sin φ₂ − sin φ₁ cos φ₂ cos Δλ )
Final course    C₂ = atan2( sin Δλ cos φ₁ , −cos φ₂ sin φ₁ + sin φ₂ cos φ₁ cos Δλ )

On the nautical sphere 1 minute of arc = 1 nautical mile, so D_gc [nmi] = 60 × σ [degrees]; R = 3 437.747 nmi. The IUGG mean radius (6 371.0088 km) gives distances 0.07 % longer.

Vertex and midpoint (vector method): with r₁, r₂ the unit position vectors, n = r₁ × r₂ is the pole of the great circle; the vertex is the unit vector in the direction of ẑ − (ẑ·n̂) n̂, and the midpoint is the direction of r₁ + r₂. The vertex lies on the passage when the arcs r₁→v and v→r₂ add up to r₁→r₂. Equivalent classical form: cos φ_vertex = cos φ₁ |sin C₁|.

Rhumb line (Mercator sailing):

Δψ = ln[ tan(π/4 + φ₂/2) / tan(π/4 + φ₁/2) ]        meridional-parts difference (radians)
q  = Δφ / Δψ   (q = cos φ₁ when Δψ ≈ 0, i.e. parallel sailing)
D_rl = R √(Δφ² + q² Δλ²),     C_rl = atan2(Δλ, Δψ)

WGS-84 geodesic: Vincenty's inverse formulae (a = 6 378 137 m, f = 1/298.257223563), iterated to 10⁻¹² rad.

Passage time: t = D / V.

Light, radar and VHF range

Horizon (Bowditch Table 12):   d = √(2 R h / β),   R = 3440.1 nmi, β = 0.8279   →   1.17 √h(ft) = 2.12 √h(m)
Rounded rule:                  d = 2.08 √h(m);    geometric: d = √(2 R h) = 1.93 √h(m)
Geographic range:              D_geo = d(H) + d(h)
Allard's law:                  E = I · T^d / (1852 d)²,   T = 0.05^(1/V),   E_threshold = 2·10⁻⁷ lx at night
Nominal range:                 luminous range at V = 10 nmi (T = 0.741)
Visible range:                 min(luminous range, geographic range)
Radar and VHF horizon:         d = √(2 · 4/3 · R h) = 2.23 √h(m)
COLREG Annex I minimum:        I = 3.43·10⁶ × 2·10⁻⁷ × D² × 0.8^(−D)  cd
  • H — elevation of the light; h — height of eye or antenna; I — luminous intensity in candela; V — meteorological visibility; d, D — distances in nautical miles.

Mercator (rhumb-line) sailing

MP(φ) = (10800/π) [ln tan(45° + φ/2) − e² sin φ − e⁴ sin³φ/3 − e⁶ sin⁵φ/5]    minutes; e = 0 on the sphere
DMP = MP₂ − MP₁,   DLo = λ₂ − λ₁ (shorter way, in minutes),   DLat = φ₂ − φ₁ (minutes)
tan C = DLo / DMP
departure = DLo × DLat/DMP  (parallel: DLo cos φ),   D = √(DLat² + departure²) = DLat / cos C
great circle (haversine, same 1′ = 1 nmi basis) for comparison

Sphere: MP = 7915.7045 log₁₀ tan(45° + φ/2). WGS84: leading correction 23.0134 sin φ.

Passage plan from waypoints

Rhumb line (Mercator sailing):
    Δψ = ln[tan(π/4 + φ₂/2) / tan(π/4 + φ₁/2)]
    q  = Δφ / Δψ   (cos φ on an east–west leg)
    d  = R √(Δφ² + q² Δλ²),   course = atan2(Δλ, Δψ)
Great circle:
    d  = 2R asin √(sin²(Δφ/2) + cos φ₁ cos φ₂ sin²(Δλ/2))
    initial course = atan2(sin Δλ cos φ₂, cos φ₁ sin φ₂ − sin φ₁ cos φ₂ cos Δλ)
Time = d / speed;  ETA = departure + Σ time
  • φ — latitude, λ — longitude in radians; R = 10 800/π nmi, so one minute of arc is one nautical mile.

Sea state statistics

Pierson–Moskowitz:  S_PM(ω) = (5/16) Hs² ωp⁴ ω⁻⁵ exp[−(5/4)(ω/ωp)⁻⁴]
JONSWAP:            S_J(ω) = (1 − 0.287 ln γ) S_PM(ω) γ^exp[−(ω − ωp)²/(2σ²ωp²)],  σ = 0.07 / 0.09
DNV γ rule:         γ = 5 (Tp/√Hs ≤ 3.6),  exp(5.75 − 1.15 Tp/√Hs) (3.6–5),  1 (≥ 5)
Moments:            m_n = ∫ ωⁿ S(ω) dω
Periods:            Tz = 2π √(m0/m2),  T1 = 2π m0/m1,  Te = 2π m₋₁/m0
Rayleigh heights:   H_rms = Hs/√2,  P(H > h) = exp[−(h/H_rms)²]
Highest 1/n:        H1/n = H_rms [√(ln n) + (n√π/2) erfc √(ln n)]
Maximum of N waves: H_mp = H_rms √(ln N),  E[H_max] ≈ H_rms [√(ln N) + 0.5772/(2√(ln N))],  N = duration/Tz

Sight reduction (intercept method)

Index correction:   IC = −IE   (on the arc subtracted)
Dip:                D = 1.76′ √h   (h in metres)
Apparent altitude:  Ha = Hs + IC − D
Refraction:         R = cot(Ha + 7.31/(Ha + 4.4))′ × (P/1010) × (283/(273 + T))
Parallax:           PA = HP cos Ha   (sun 0.15′, moon from the almanac, stars nil)
Observed altitude:  Ho = Ha − R + PA ± SD   (+ lower limb, − upper limb)
Hour angle:         LHA = GHA + longitude   (east positive)
Computed altitude:  sin Hc = sin Lat sin Dec + cos Lat cos Dec cos LHA
Azimuth:            Zn = atan2(−cos Dec sin LHA, sin Dec cos Lat − cos Dec sin Lat cos LHA)
Intercept:          a = Ho − Hc   (minutes = nautical miles; + towards, − away)

Tidal height (rule of twelfths)

Interval between two turning points (first height h₁ at time t₁, second h₂ at t₂; R = |h₂ − h₁|; D = t₂ − t₁; f = (t − t₁)/D):

Rule of twelfths (cumulative fraction of the range at the end of each sixth):

sixth:      1      2      3      4      5      6
cumulative: 1/12   3/12   6/12   9/12   11/12  12/12
p(f) linear within each sixth;  h(t) = h₁ ± R p(f)

Cosine curve:

p(f) = (1 − cos πf) / 2,          h(t) = h₁ ± R p(f)
rate = ± π R sin(πf) / (2D)       (maximum π R / 2D at mid-tide)

Inverse (time at which a given height is reached): p = (h_req − h₁)/(±R), then f from the piecewise-linear inverse (twelfths) or f = acos(1 − 2p)/π (cosine), t = t₁ + f D.

Depth:

depth = charted depth + height of tide
height needed = required depth − charted depth

True wind from apparent wind

True wind from relative wind (C.3, C.4):
    V_WT = √(V_WR² + V_G² − 2 V_WR V_G cos α_WR)
    α_WT = atan2(V_WR sin(α_WR + ψ) − V_G sin ψ,  V_WR cos(α_WR + ψ) − V_G cos ψ)
Height correction (C.9):
    V_WT,ref = V_WT (Z_ref / Z_a)^p,   p = 1/9 (ISO 15016:2025) or 1/7 (earlier editions)
Relative wind from true wind (C.10, C.11):
    V_WR = √(V_WT² + V_G² + 2 V_WT V_G cos(α_WT − ψ))
    α_WR = atan2(V_WT sin(α_WT − ψ),  V_G + V_WT cos(α_WT − ψ))
  • V_WR, α_WR — relative wind speed and direction off the bow, 0° on the bow, positive from starboard
  • V_WT, α_WT — true wind speed and the true direction it comes from
  • ψ — heading; V_G — speed over ground; Z_a — anemometer height; Z_ref — reference height, 10 m

Wave properties and encounter period

Dispersion relation and kinematics (depth h, wavenumber k = 2π/λ, ω = 2π/T):

ω² = g k tanh(kh)        λ₀ = g T²/2π (deep water)
c = λ/T = ω/k            c_g = n c,  n = ½ (1 + 2kh / sinh 2kh)   (n → ½ deep, → 1 shallow)
regime: deep h/λ > 0.5,  shallow h/λ < 0.05,  intermediate between

Velocities, energy, breaking (amplitude a = H/2):

u(z) = a ω cosh(k(h − z)) / sinh(kh)      (z measured down from the surface; deep water a ω e^(−kz))
P = ρ g H² c_g / 8  per metre of crest     (deep water: ρ g² H² T / 32π)
H_max = 0.142 λ tanh(kh)                   (Miche)

Encounter period for a ship at speed V with α between heading and wave direction (0° head seas):

ω_e = ω + k V cos α,   T_e = 2π / |ω_e|
deep-water check (MSC.1/Circ.1228): T_e ≈ 3T² / (3T + V_kn cos α)

Deck, cargo and mooring

Anchor cable catenary and scope

Chain weight:

m [kg/m] = 0.0219 d²          (d in mm, ISO 1704 stud-link approximation)
w = m g (1 − ρ_water/ρ_steel)   submerged weight per metre, N/m

Catenary with horizontal tension H (parameter a = H/w), hawse pipe D above the seabed:

Cable needed for a horizontal pull at the anchor:   s = √(D² + 2 a D)
If L ≥ s:   cable on the bottom = L − s,   uplift = 0,
            horizontal reach x = a asinh(s/a) + (L − s),   hawse tension T = H + w D
If L < s:   the cable is fully suspended; the uplift angle θ at the anchor follows from
            D = √(a² + (s₀ + L)²) − √(a² + s₀²),  tan θ = s₀ / a   (solved numerically)
Maximum H without uplift for a cable L:   H_max = w (L² − D²) / (2 D)

Environmental force and holding:

F_wind = ½ ρ_air C_d A V²
Holding capacity = m_anchor g × holding coefficient
Scope = L / D
Swinging radius = x + ship length

Rules of thumb (Admiralty Manual of Seamanship): cable in shackles ≈ 1.5 √D (D in metres); scope 6 × depth in normal conditions, up to 10 × in heavy weather.

  • D — seabed to hawse pipe (water depth + hawse height above the waterline); L — cable paid out; A — frontal windage area; C_d — drag coefficient (OCIMF head-wind values 0.7–1.1)

Anchor holding power calculator

Holding capacity and allowable force:

H = η × W × g
F_allow = H / SF

Size effect from Vryhof's holding-capacity charts (UHC = A W^0.92):

H = η × W_ref g × (W / W_ref)^0.92,     W_ref = 10 t

Anchor mass for a design force F:

W = F × SF / (η g)

Efficiencies η by Vryhof class, for a 10 t anchor:

  • Class A, 33 to 55 — Stevpris, Stevshark, FFTS
  • Class B, 17 to 25 — Bruce SS, Bruce TS, Hook
  • Class C, 14 to 26 — Stevin, Stevfix, Stevmud, Flipper Delta
  • Class D, 8 to 15 — Danforth, LWT, Moorfast, Stato, Offdrill, Boss
  • Class E, 8 to 11 — AC14, Stokes, Snugstow, Weldhold
  • Class F, 4 to 6 — US Navy stockless, Beyers, Union, Spek

Ballast water exchange time

Q = pumps × rated capacity
sequential:   pumped = N × 2V (1 + s),   efficiency = 1 − residual
flow-through / dilution:   pumped = N × n V,   efficiency = 1 − e^(−n)    (n = 3 → 95.0 %)
total time = pumped / Q,   time per tank = pumped / (N Q),   distance = time × speed
location: ≥ 200 nmi from land and ≥ 200 m deep (B-4.1.1); else ≥ 50 nmi and ≥ 200 m (B-4.1.2)

Berthing energy and fender selection

Normal and abnormal berthing energy:

E_N = ½ M_D v_B² C_M C_E C_C C_S        E_A = E_N × factor of safety
C_B = M_D / (ρ L_BP B D)

Added mass C_M:

PIANC 2002:  1.8 for K_C/D ≤ 0.1;  1.5 for K_C/D ≥ 0.5;  1.875 − 0.75 K_C/D between  (then C_C = 1)
Vasco Costa: 1 + 2D/B           Ueda: 1 + πD / (2 C_B B)

Eccentricity (side berthing, contact at x from the bow, berthing angle α):

K = (0.19 C_B + 0.11) L_BP,   R = √((L/2 − x)² + (B/2)²),   γ = 90° − α − asin(B / 2R)
C_E = (K² + R² cos²γ) / (K² + R²)

Berth configuration C_C (with Vasco Costa or Ueda): solid quay 0.8 (K_C/D ≤ 0.5) or 0.9, partly closed 0.9 or 1.0, open piles 1.0; 1.0 whenever α > 5°. Softness C_S: 0.9 for hard fenders (deflection ≤ 150 mm), else 1.0.

Design velocity: Brolsma curves (BS 6349-4:2014 Fig. 9) by displacement and navigation condition a–e, minimum 0.08 m/s. Abnormal factors (PIANC Table 4.2.5): tankers and bulk carriers 1.25 (large) to 1.75 (small), container ships 1.5 to 2.0, general cargo 1.75, RoRo, ferries, cruise ships and tugs 2.0.

Fender check: E_RPD ≥ E_A (before tolerance, angle, temperature and velocity factors); hull pressure = R_F / panel area against the class allowable (tankers and bulk 150–300 kPa, container 200–400 kPa, general cargo 400–700 kPa).

Bollard pull for a tow

Design weather (DNV): ocean tow 20 m/s wind, 5 m H_s, 0.5–1 m/s current, zero speed; benign 15 m/s, 2 m, 0.5 m/s; coastal tows 2 knots over the ground added to the current.

F_wind    = ½ ρ_air C_s C_h A_w V_w²
F_current = ½ ρ_w C_d A_frontal V_rel²              (barges, blunt tows; C_d 0.50 raked/square, 0.35, 0.20)
          = ½ ρ_w S V_rel² [(1+k) C_F(Rn) + ΔC_F]    (ship-shaped hulls, ITTC-1957 friction)
F_wd      = ⅛ ρ_w g R² B H_s²                        (DNV-RP-H103 §7.2.6; R: ship bow 0.45, spoon barge 0.55, raked barge 0.67, cylinder 0.88, Condeep 0.97, square 1.00)
F_total   = F_wind + F_current + F_wd
BP_required = F_total / η_tug                       (η 0.75 classic DNV; 0.70–0.80 by tug size and sea state)

Wind coefficients (DNV-OS-C301): shape C_s 1.0 flat hull, 1.1 clustered deckhouses, 1.25–1.5 isolated structures; height C_h 1.0 to 15.3 m, 1.1 to 30.5 m, 1.2 to 46 m, 1.3 to 61 m, 1.37 to 76 m above the waterline. A proper calculation sums C_s C_h A over bands; enter that sum as the area with coefficients 1.0.

Towing speed estimate: available pull assumed to fall linearly from η × BP at zero speed to zero at the tug's free-running speed; the speed where it meets the tow resistance is indicative only.

Cargo securing (CSS Code Annex 13)

Accelerations:   a_x, a_y, a_z from Table 2 (stowage level, x/L) × Table 3 (length, speed); a_y × Table 4 (B/GM < 13)
Forces:          F_x = m a_x + F_wx + F_sx,   F_y = m a_y + F_wy + F_sy,   F_z = m a_z
Wind, sloshing:  1 kN/m² each on deck; sloshing up to 2 m above the deck
Lashings:        CS = MSL / 1.5,   f = μ sin α + cos α
Sliding:         F_y ≤ μ m g + Σ CS f
Tipping:         F_y a ≤ b m g + Σ CS c
Longitudinal:    F_x ≤ μ (m g − F_z) + Σ CS f
Rule of thumb:   Σ MSL on each side ≥ m g
  • μ — friction coefficient (0.3 steel on timber or rubber, 0.1 steel on dry steel, 0 steel on wet steel); α — vertical lashing angle; a — height of the centre of gravity above the tipping edge; b — lever of stableness; c — lever of a lashing about the tipping edge.

Cargo ventilation and dew point

Saturation vapour pressure (Magnus, Alduchov–Eskridge), hPa:

e_s(T) = 6.1094 exp(17.625 T / (T + 243.04))

Psychrometer (Sprung):

e = e_s(T_wet) − A p (T_dry − T_wet)       A = 6.62·10⁻⁴ K⁻¹ aspirated/whirling, 8.0·10⁻⁴ K⁻¹ non-ventilated
RH = e / e_s(T_dry),   T_dew = 243.04 ln(e/6.1094) / (17.625 − ln(e/6.1094)),   W = 622 e / (p − e)  g/kg

Rules:

dew-point rule:     ventilate if T_dew,outside < T_dew,hold
three-degree rule:  ventilate hygroscopic cargo if T_dry,outside ≤ T_cargo at loading − 3 K
ship sweat:         T_dew,hold > T_steel          cargo sweat (if ventilating): T_dew,outside > T_cargo

Cathodic protection anodes

Current demand (A), with coating breakdown f_c:

I_ci = A i_ci f_ci     I_cm = A i_cm f_cm     I_cf = A i_cf f_cf
f_ci = a,   f_cm = a + b t_f / 2,   f_cf = a + b t_f   (≤ 1; bare steel f_c = 1)

Anode mass, count and life:

Q = I_cm × t_f × 8760  [Ah]       M = Q / (u ε)       N = ceil(M / m_anode)
life = N m_anode u ε / (I_cm × 8760)

Anode current output (initial, new anode):

I_a = (E_c − E_a) / R_a,   E_c = −0.80 V
long slender stand-off (L ≥ 4r):  R_a = ρ/(2πL) [ln(4L/r) − 1],  r = periphery / 2π
short slender stand-off:          R_a = ρ/(2πL) [ln(2L/r (1 + √(1 + (r/2L)²))) + r/2L − √(1 + (r/2L)²)]
long flush-mounted:               R_a = ρ / (2S),  S = (length + width)/2
short flush, bracelet, hull:      R_a = 0.315 ρ / √A_exposed
check: N I_a ≥ I_ci and I_cf

RP-B401 data (2021): bare-steel mean current density 0.070 (tropical) to 0.120 A/m² (arctic) at 0–30 m, with initial/final values per Table 8-1; coating constants a = 0.10/0.05/0.02/0.02 and b = 0.10/0.025/0.012/0.008 per year for categories I–IV at 0–30 m (b = 0.05/0.015/0.008/0.005 below 30 m); Al-Zn-In 2 000 Ah/kg at −1.05 V, zinc 780 Ah/kg at −1.03 V; utilisation 0.90 long stand-off, 0.85 short stand-off and long flush, 0.80 bracelet/flush.

Ship hulls: coated hull 10–20 mA/m² (+5 mA/m² for dockings beyond 30 months), bonded propeller about 500 mA/m², uncoated steel 100–150 mA/m²; design life = docking interval.

Mooring line and winch brake (MEG4)

LDBF = 1.00–1.05 × SDMBL,   WLL = 0.50 × SDMBL
tail design break force ≥ 1.25 × SDMBL (synthetic / HMSF lines), 1.30 × SDMBL (steel wire lines)
fitting SWL ≥ 1.25 × SDMBL
brake design holding capacity = 0.80 × SDMBL,   brake rendering set point = 0.60 × SDMBL (first layer)
r_k = D_drum/2 + (k − 0.5) d_rope,   rendering load on layer k = set point × r₁/r_k

Paint coverage and quantity

TSR = VS × 10 / DFT              theoretical spreading rate, m²/L (VS in %, DFT in µm)
PSR = TSR × (1 − loss)           practical spreading rate
WFT = DFT / VS                   wet film thickness to apply
VS_thinned = VS / (1 + thinner)  volume solids after adding thinner (by volume)

litres (theoretical) = area × (n × DFT + profile allowance) / (10 × VS)
litres (practical)   = theoretical / (1 − loss)
containers = ceil(litres / pack size),  mass = litres × density,  cost = litres × price

Loss factors (rules of thumb): brush/roller 5–15 %, airless spray on flat steel 20–30 %, complex steelwork 30–50 %, windy outdoor spraying 40–60 %. Profile allowance: 25–40 µm on the first coat for a 50–75 µm blast profile.

Wire rope and chain safe working load calculator

Minimum breaking force of stranded rope (EN 12385-4):

MBL = K × d² × R_r / 1 000          kN, d in mm, R_r in N/mm²

Safe working load:

SWL = MBL × η_t / Z

ILO coefficient of utilisation for wire rope (ILO C152):

Z = 10⁴ / (8.85 × SWL + 1 910)       SWL in tonnes, up to 160 t
Z = 3 above 160 t;  slings: Z = 5 up to 10 t

Lifting chain:

breaking force ≥ 4 × WLL
  • K — 0.330 for fibre core, 0.356 for steel core (IWRC), 6×19 and 6×36 classes
  • R_r — rope grade: 1770, 1960 or 2160 N/mm²
  • η_t — termination efficiency, about 0.9 for a ferrule-secured eye
  • Z — coefficient of utilisation (safety factor)

Engine room and safety

Enclosed space purge time

Time constant:      K V / Q
Concentration:      C(t) = C_fresh + (C_0 − C_fresh) e^(−Q t / (K V))
Time to target:     t = (K V / Q) ln((C_0 − C_fresh) / (C_target − C_fresh))
Air changes:        Q t / V
  • V — volume of the space; Q — fresh air supplied; K — mixing factor (1 = perfect mixing).

Engine-room ventilation (ISO 8861)

Combustion air (ISO 8861 §5.2), ρ = 1.13 kg/m³ at 35 °C:

q_dp = P_dp m_ad / ρ        main engines      (m_ad 0.0023 kg/(kW·s) 2-stroke, 0.0020 4-stroke)
q_dg = P_dg m_ad / ρ        generator engines running at sea (not stand-by)
q_b  = Q_b m_fs m_af / ρ    boilers           (0.11 kg fuel per kWh, 15.7 kg air per kg fuel)
q_c  = q_dp + q_dg + q_b

Heat evacuation (§5.3 and §6), c = 1.01 kJ/(kg·K), ΔT = 12.5 K:

Σφ = P_dp h_d/100 + P_dg h_d/100 + P_el (1/η − 1) + Q_b h_b/100 + φ_ep + φ_p + φ_el + φ_t + φ_o
q_h = Σφ / (ρ c ΔT) − 0.4 (q_dp + q_dg) − q_b

Total (§5.1):

Q = max( q_c + q_h ,  1.5 q_c )
air changes/h = 3600 Q / V_room,   per fan = Q / n,   exhaust = Q − q_c

Fixed CO₂ fire-extinguishing system

Machinery spaces:      free gas = max(40 % × (V without the upper casing + receiver air),
                                      35 % × (V gross + receiver air))
Small cargo ships:     35 % and 30 % (under 2000 GT, machinery spaces not entirely separate)
Cargo spaces:          30 % × V;   vehicle and ro-ro spaces: 45 % × V
Receiver air:          V_r (p + p_atm) / p_atm
CO₂ mass:              free gas / 0.56 m³/kg
Cylinder capacity:     ≥ charge / (2/3 kg/L)
Discharge rate:        85 % in 2 min (machinery); 2/3 in 10 min (cargo, vehicle); 2/3 in 20 min (solid bulk)
Free-efflux concentration: 1 − e^(−free gas / V)

Starting air receivers and compressors

Starts required:          engines × 12 (reversible) or × 6 (non-reversible)
Free air required:        A = starts × air per start + other consumers
Usable air per m³:        u = p1 (1 − (p2/p1)^(1/n)) / p_atm   (absolute pressures)
Receiver volume:          V = A / u   (n = 1: V = A p_atm / (p1 − p2))
Pressure for the starts:  p such that V_installed u(p) = A
Compressor capacity:      V_installed (p − p_atm) / p_atm per hour

Results are estimates. They do not replace the governing code, class or flag requirements, or a check by a competent person.