Manufacturing and machining glossary
19 terms from the manufacturing and machining calculators, each in two or three sentences with its symbol, its unit and a typical value. Every entry links to the calculators that use it; the formula sheet has the equations.
-
Arithmetic mean roughnessRaµm (µin)
Also called Ra, surface roughness, CLA, AA, surface finish
The average absolute deviation of a surface profile from its mean line over the evaluation length, as defined in ISO 4287 and its successor ISO 21920-2. Turned surfaces typically reach 0.8 to 3.2 µm and ground surfaces 0.1 to 0.8 µm; 1 µm equals 39.37 µin. Because it averages out peaks and scratches, sealing faces often also specify Rz.
-
Bend allowanceBAmm (in)
Also called BA, flat pattern length
The length of the neutral axis through a bend, which is the flat material the bend consumes. It equals the bend angle in radians times (inside radius + K-factor × thickness), so a 90° bend in 2 mm sheet with a 2 mm radius and K = 0.325 takes 4.16 mm. Added to the straight flanges it gives the blank.
-
Bend deductionBDmm (in)
Also called BD, outside setback
The amount subtracted from the sum of the outside flange dimensions to get the flat length of a bent part. It equals twice the outside setback minus the bend allowance; for a 90° bend the outside setback is inside radius plus thickness. Press brake shops often keep tables of it per material, thickness and die.
-
Brinell hardnessHBWHBW number
Also called HB, HBW, BHN
A hardness number from the mean diameter of the indentation left by a tungsten carbide ball, usually 10 mm under 3000 kgf, per ISO 6506. Mild steel reads about 120 HBW and quenched and tempered alloy steel 250 to 350 HBW; for steels, tensile strength in MPa is roughly 3.4 times HBW. The large ball suits castings.
Hardness conversion calculator (HRC, HRB, HV, HB), Material properties table (steel, aluminium, plastics)
-
Chip loadfzmm/tooth (in/tooth)
Also called feed per tooth, IPT, f_z
The distance each cutting edge advances per revolution, equal to feed rate divided by spindle speed and number of teeth. Carbide end mills in steel typically run 0.02 to 0.1 mm per tooth, rising with cutter diameter. Too small a chip load rubs instead of cutting, which heats the edge and wears it quickly.
Chip load calculator with chip thinning, Speeds and feeds calculator (milling, turning, drilling), Machining time calculator (turning, facing, drilling, milling)
-
Clamp tonnagekN (US tons)
Also called clamp force, clamping force, clamp factor
The force an injection moulding machine needs to hold the mould shut against melt pressure: total projected area of cavities and cold runner times a clamp factor, the mean cavity pressure. Common factors are 2 to 5 US tons per square inch, about 28 to 69 MPa, with 3 a usual starting point. Too little clamp lets the part flash.
-
Cutting speedvcm/min (SFM)
Also called surface speed, SFM, SMM
The speed of the cutting edge relative to the work surface, equal to π times diameter times spindle speed. Starting values with carbide tools are about 150 to 300 m/min for carbon steel, well above 300 m/min for aluminium and 40 to 80 m/min for titanium alloys. It affects tool life more strongly than feed or depth of cut.
Speeds and feeds calculator (milling, turning, drilling), Machining time calculator (turning, facing, drilling, milling)
-
Deposition efficiencydimensionless
Also called electrode efficiency, filler metal yield
The ratio of weld metal deposited to filler consumed, the rest lost as spatter, slag and stubs. Typical values are 55 to 65 % for stick electrodes, 90 to 95 % for solid MIG/MAG wire, 85 to 90 % for flux-cored wire and nearly 100 % for submerged arc wire. It turns joint weld metal into filler to buy.
-
Drill point angleθ°
Also called point angle, drill tip angle
The included angle between the two cutting lips at the tip of a twist drill. General-purpose drills use 118°, and drills for harder materials or carbide drills 135° to 140°; the point adds about 0.30 times the diameter to the hole depth at 118° and 0.21 times at 135°. Drawings usually give full-diameter depth, so the tip goes deeper.
Drill point length calculator, Machining time calculator (turning, facing, drilling, milling)
-
Feed ratevfmm/min (ipm)
Also called feed, IPM, feed per revolution
The speed at which the tool advances through the work: feed per tooth times number of teeth times spindle speed in milling, or feed per revolution times spindle speed in turning and drilling. A four-flute end mill at 0.05 mm per tooth and 3000 rpm feeds 600 mm/min. With the length of cut it sets the cutting time.
Speeds and feeds calculator (milling, turning, drilling), Chip load calculator with chip thinning, Machining time calculator (turning, facing, drilling, milling)
-
K-factor (sheet metal)Kdimensionless
Also called K-factor, neutral axis factor
The position of the neutral axis in a bend, given as its distance from the inside surface divided by sheet thickness. It ranges from about 0.3 for tight radii to 0.5 for large ones, and DIN 6935 gives 0.325 when the inside radius equals the thickness. A test bend in the shop’s own material and tooling is the most reliable.
-
Overall equipment effectivenessOEEdimensionless (%)
Also called OEE, availability, performance, quality rate
The share of planned production time that is truly productive, found as availability times performance times quality. A line running 90 % of planned time at 95 % of ideal speed with 99 % good parts scores 84.6 %. 85 % is often quoted as world class, while many plants score nearer 60 %.
-
Punching forceFkN (US tons)
Also called punch tonnage, blanking force, press tonnage
The force to shear a hole or blank out of sheet, equal to cut perimeter times thickness times ultimate shear strength. Shear strength is about 0.75 of tensile strength for steel and 0.65 for aluminium; a 20 mm hole in 3 mm steel with 300 MPa shear strength needs 56.5 kN. Stripping adds roughly a further 10 %.
-
Radial chip thinningdimensionless
Also called RCTF, chip thinning factor
The drop of maximum chip thickness below the programmed feed per tooth when the radial width of cut is under half the cutter diameter. The factor is 1/√(1 − (1 − 2a_e/D)²), about 1.67 at a 10 % stepover, and the feed must rise by it to keep the real chip load. Ignoring it makes light passes rub.
Chip load calculator with chip thinning, Speeds and feeds calculator (milling, turning, drilling)
-
Rockwell hardnessHRCHRC or HRB number
Also called HRC, HRB, Rockwell C
A hardness number from the permanent indentation depth under a major load applied after a minor preload, per ISO 6508 and ASTM E18. The C scale uses a diamond cone and 150 kgf for hardened steel, roughly 20 to 70 HRC; the B scale uses a 1/16 in ball and 100 kgf for softer metals. Scales convert only through tables.
Hardness conversion calculator (HRC, HRB, HV, HB), Material properties table (steel, aluminium, plastics)
-
Takt times (min)
Also called takt
The available production time divided by customer demand over the same period, the pace at which one finished part must leave the line. A 7.5 h shift with a demand of 450 parts has a takt time of 60 s. A cycle time longer than takt means demand cannot be met without overtime or extra capacity.
OEE and takt time calculator, Machining time calculator (turning, facing, drilling, milling)
-
Tap drill sizemm (in, drill number)
Also called tap drill, tapping drill
The diameter drilled before tapping an internal thread, chosen to leave a set percentage of full thread depth. For ISO metric threads it is about the major diameter minus the pitch, 8.5 mm for M10 × 1.5; for inch threads it is the major diameter minus 0.01299 × percentage ÷ threads per inch, a #7 drill for 1/4-20 UNC.
-
Thread percentagedimensionless (%)
Also called percentage of thread, thread engagement
The depth of an internal thread as a share of the basic full thread height, set by the tap drill size. About 75 % is usual for cut taps in steel; 100 % adds only about 5 % to strength but roughly triples tapping torque. Tough alloys and deep holes are often tapped at 50 to 65 %.
-
Vickers hardnessHVHV number
Also called HV, diamond pyramid hardness
A hardness number from the diagonals of the square indentation left by a 136° diamond pyramid, equal to the test force in kgf divided by the indentation’s sloping surface area in mm², as defined in ISO 6507. One scale covers soft metals to hard ceramics: annealed mild steel reads about 130 HV and hardened tool steel 700 to 850 HV.
Hardness conversion calculator (HRC, HRB, HV, HB), Material properties table (steel, aluminium, plastics)
Results are estimates. They do not replace the governing code, class or flag requirements, or a check by a competent person.