Automotive and aerospace formulas
The formulas behind the 14 automotive and aerospace calculators, on one page you can print or save as a PDF. Each block lists its variables and standard; the heading opens the calculator, with its assumptions and a worked example.
Compression ratio calculator
Volumes of one cylinder:
V_s = π/4 × b² × s
V_gasket = π/4 × b_g² × t
V_deck = π/4 × b² × d
V_c = V_chamber + V_gasket + V_deck + V_piston
Static compression ratio:
CR = (V_s + V_c) / V_c
- b — cylinder bore; s — stroke
- b_g — head gasket bore; t — compressed gasket thickness
- d — deck clearance, positive when the piston stops below the deck
- V_chamber — head chamber volume in cc
- V_piston — dish and valve reliefs positive, dome negative
- 1 in³ = 16.387 cc
Density altitude calculator
Station pressure and pressure altitude, ISA troposphere:
p = QNH × (1 − L h / T0)^5.2559
PA = (T0 / L) × (1 − (p / p0)^0.190263)
Density and density altitude:
ρ = p / (R T_v)
T_v = T / (1 − (e / p)(1 − 0.622))
DA = (T0 / L) × (1 − (ρ / ρ0)^0.234969)
Rule of thumb for comparison:
DA ≈ PA + 120 ft × (OAT − T_ISA)
T_ISA = 15 °C − 1.98 °C × PA / 1 000 ft
- QNH — altimeter setting; h — field elevation
- T0 = 288.15 K, p0 = 1 013.25 hPa (29.92 inHg), ρ0 = 1.225 kg/m³, L = 6.5 K/km
- R = 287.05 J/(kg·K); T — outside air temperature in K
- e — vapour pressure at the dew point; T_v — virtual temperature
Drag and lift force calculator
Dynamic pressure, force and power:
q = ½ ρ v²
F = q × C × A
P = F × v
Air density from altitude and temperature:
p = 101 325 × (1 − 2.25577 × 10⁻⁵ z)^5.2559 Pa
ρ = p / (287.04 × T)
Typical drag coefficients on frontal area:
| Body | Cd | Source |
|---|---|---|
| Passenger car | 0.30 | Çengel and Cimbala |
| Cyclist, upright, about 0.5 m² | 1.1 | Munson et al. |
| Cyclist, racing crouch, about 0.36 m² | 0.88 | Munson et al. |
| Flat square plate or disc facing the flow | 1.17 | Hoerner |
| Sphere, laminar boundary layer | 0.47 | Hoerner |
- ρ — air density; v — air speed relative to the body
- C — drag coefficient Cd or lift coefficient CL
- A — frontal area for drag, wing area for lift
- z — altitude in m; T — air temperature in K
Engine displacement calculator
Displacement and its inverses:
V = π/4 × b² × s × n
b = √(4 V / (π s n))
s = 4 V / (π b² n)
Mean piston speed:
S_p = 2 × s × N
- b — bore; s — stroke; n — number of cylinders
- N — engine speed in revolutions per minute
- 1 in³ = 16.387 cc; 1 L = 61.02 in³
Fuel injector size calculator
Injector size and horsepower supported:
flow per injector = hp × BSFC / (n × DC)
hp = flow × n × DC / BSFC
Fuel pressure and units:
flow at p2 = flow at p1 × √(p2 / p1)
cc/min = lb/hr × 453.6 / 60 / ρ
- hp — flywheel horsepower; BSFC — lb of fuel per hp per hour
- n — number of injectors; DC — maximum duty cycle, such as 0.80
- p — pressure across the injector, fuel pressure minus manifold pressure
- ρ — fuel density in g/cm³: 0.72 for gasoline, which gives 10.5 cc/min per lb/hr, and 0.78 for E85
Typical BSFC values, lb/(hp·h):
| Engine | Gasoline | E85 (× 1.5) |
|---|---|---|
| Naturally aspirated | 0.45 to 0.50 | 0.75 |
| Supercharged | 0.55 to 0.75 | 0.90 |
| Turbocharged | 0.55 to 0.75 | 0.975 |
Gear ratio and vehicle speed calculator
Road speed and engine speed:
v = N × π D / (60 × i_g × i_f)
mph = rpm × D[in] / (i_g × i_f × 336.13)
Tire revolutions and speedometer error:
revs per mile = 63 360 / (π D[in])
reading = true speed × D_cal / D
error = D_cal / D − 1
- N — engine speed in rpm
- D — tire overall diameter; D_cal — the diameter the speedometer was set for
- i_g — transmission gear ratio; i_f — final drive (axle) ratio
- 336.13 = 63 360 / (60 π)
Horsepower calculator
Power from torque, exact:
P = T × 2π × N / 60
hp = T[lbf·ft] × N[rpm] / 5 252
Estimates from a quarter-mile run:
hp = W × (K_t / ET)³
hp = W × (mph / K_v)³
Wheel and crank power:
hp_wheel = hp_crank × (1 − loss)
- T — torque; N — engine speed
- W — race weight in lb, with driver and fuel
- ET — elapsed time in s; mph — trap speed
- K_t, K_v — Hale 5.825 and 234; Fox 6.050 and 225; Huntington 6.290 and 224
- 1 hp = 745.7 W; 1 PS = 735.5 W
Quarter-mile ET and trap speed calculator
Quarter-mile estimates:
ET = K_t × (W / hp)^(1/3)
mph = K_v × (hp / W)^(1/3)
Eighth mile, from the constant-power model behind the formulas:
ET_1/8 = ET_1/4 / 2^(2/3) = ET_1/4 / 1.587
mph_1/8 = mph_1/4 / 2^(1/3) = mph_1/4 / 1.260
- W — race weight in lb, with driver and fuel
- hp — flywheel horsepower; wheel hp is divided by (1 − loss) first
- K_t, K_v — Hale 5.825 and 234; Fox 6.050 and 225; Huntington 6.290 and 224
Rocket equation calculator (delta-v)
Rocket equation and its inverse:
Δv = v_e × ln(m0 / mf)
v_e = Isp × g0
m_p = mf × (e^(Δv / v_e) − 1)
Staging:
Δv_total = Σ v_e,i × ln(m0,i / mf,i)
- m0 — initial (fuelled) mass; mf — final mass, dry structure plus payload
- m_p — propellant mass, m0 − mf
- Isp — specific impulse in seconds; g0 = 9.806 65 m/s²
- m0,i — mass at ignition of stage i, including all stages above it and the payload
Speed of sound and Mach number calculator
Speed of sound and Mach number:
a = √(γ R T)
M = V / a
V = M × a
Total (stagnation) temperature:
T_total = T × (1 + (γ − 1) / 2 × M²)
Standard atmosphere temperature:
T = 288.15 K − 6.5 K/km × h up to 11 km (36 089 ft)
T = 216.65 K from 11 to 20 km
- γ — ratio of specific heats, 1.4 for air
- R — specific gas constant, 287.05 J/(kg·K) for air
- T — static air temperature in kelvin; V — speed
Stopping distance calculator
Stopping distance:
d = v × t + v² / (2 × (a + g G))
With a friction coefficient:
a = μ × g
AASHTO form in US units, V in mph:
SSD = 1.47 V t + V² / (30 × (a/32.2 + G)) ft
- v — speed; t — perception-reaction time, 2.5 s in AASHTO design
- a — deceleration on a level road, 3.4 m/s² (11.2 ft/s²) in AASHTO design
- G — grade as a decimal, positive uphill
- μ — tire-road friction coefficient; g = 9.81 m/s²
Average sliding friction coefficients (Wong):
| Surface | μ |
|---|---|
| Asphalt or concrete, dry | 0.75 |
| Concrete, wet | 0.70 |
| Earth road, dry | 0.65 |
| Gravel | 0.55 |
| Asphalt, wet | 0.45 to 0.60 |
| Earth road, wet | 0.40 to 0.50 |
| Snow, hard-packed | 0.15 |
| Ice | 0.07 |
Thrust-to-weight, wing loading and stall speed calculator
Ratios and loadings:
W = m × g
T/W = thrust / W
a_vertical = g × (T/W − 1)
wing loading = W / S
power loading = W / P
Stall speed:
V_s = √(2 W / (ρ S CL_max))
- m — mass; g = 9.81 m/s²; S — wing area; P — engine power
- ρ — air density from the standard atmosphere at the altitude
- CL_max — maximum lift coefficient of the wing, from the aircraft data
- In US units 1 lb of mass weighs 1 lbf, so wing loading in lb/ft² is the same number in lbf/ft²
Tire size calculator and comparison
Metric sizes, width W in mm, aspect ratio AR in %, rim d in inches:
H = W × AR / 100
D = d × 25.4 + 2 H mm
Flotation sizes such as 33x12.50R15 give D and W in inches:
H = (D − d) / 2
Circumference, revolutions and speedometer:
C = π D
revs per mile = 63 360 / (π D[in])
true speed = reading × D_B / D_A
- H — sidewall height; D — overall diameter
- D_A — the original tire the speedometer was set for; D_B — the new tire
- P, LT and ST prefixes, ZR and R construction letters and the load and speed index do not change the size
True airspeed calculator (TAS and Mach)
Impact pressure from calibrated airspeed, and Mach number:
q_c = p0 × [(1 + 0.2 (V_c / a0)²)^3.5 − 1]
M = √(5 × [(q_c / p + 1)^(2/7) − 1])
True, equivalent and ground speed:
a = √(γ R T)
TAS = M × a
EAS = a0 × M × √(p / p0)
GS = TAS − head wind
Rule of thumb for comparison:
TAS ≈ CAS × (1 + 0.02 × PA / 1 000 ft)
- V_c — calibrated airspeed, IAS plus the POH correction
- p — static pressure at the pressure altitude PA; T — outside air temperature in K
- p0 = 29.92 inHg; a0 = 661.48 kn, the sea-level speed of sound
- γ = 1.4; R = 287.05 J/(kg·K)
Results are estimates. They do not replace the governing code, class or flag requirements, or a check by a competent person.