Skip to content
Engineering Bible

Results appear as you type. Use the arrow keys to move through them and Enter to open one.

Popular

↑ ↓ moveEnter openEsc close

Mechanical engineering formulas

The formulas behind the 32 mechanical calculators, on one page you can print or save as a PDF. Each block lists its variables and standard; the heading opens the calculator, with its assumptions and a worked example.

Materials and stress

Carbon equivalent calculator (CE, Pcm, CET) and preheat

Carbon equivalents, with element contents in mass %:

CE(IIW) = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15
CE(AWS) = C + (Mn + Si)/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15
Pcm = C + Si/30 + (Mn + Cu + Cr)/20 + Ni/60 + Mo/15 + V/10 + 5 B
CET = C + (Mn + Mo)/10 + (Cr + Cu)/20 + Ni/40

Minimum preheat, EN 1011-2 Annex C, method B:

T_p = 697 CET + 160 tanh(d/35) + 62 HD^0.35 + (53 CET − 32) Q − 328    °C
  • d — plate thickness, mm (10 to 90)
  • HD — diffusible hydrogen of the weld metal, ml/100 g (1 to 20)
  • Q — effective heat input, kJ/mm (0.5 to 4.0): arc energy times the thermal efficiency of the process
  • The formula holds for CET 0.20 to 0.50 % and C 0.05 to 0.32 %, Mn 0.5 to 1.9 %, Si up to 0.8 %, Cr up to 1.5 %, Cu up to 0.7 %, Mo up to 0.75 %, Ni up to 2.5 %, V up to 0.18 %, Nb up to 0.06 %, Ti up to 0.12 % and B up to 0.005 %

Elastic constants calculator (E, G, K, Poisson's ratio)

From E and ν:

G = E / (2 (1 + ν))
K = E / (3 (1 − 2ν))
λ = E ν / ((1 + ν)(1 − 2ν)),    M = K + 4G/3

From the other pairs:

E and G:  ν = E / (2G) − 1
E and K:  ν = (3K − E) / (6K)
G and K:  E = 9KG / (3K + G),   ν = (3K − 2G) / (2 (3K + G))
G and ν:  E = 2G (1 + ν)
K and ν:  E = 3K (1 − 2ν)
  • E — Young's modulus, tension or compression; G — shear modulus (modulus of rigidity)
  • K — bulk modulus, pressure over volume strain; ν — Poisson's ratio, lateral over axial strain

Typical values from standards and data sheets:

MaterialE (GPa)G (GPa)νSource
Structural steel210810.3EN 1993-1-1
Aluminium alloys70270.3EN 1999-1-1
Stainless steel 30419378—Cleveland-Cliffs
Copper C1100011744.1—National Bronze
Brass C2600011041.4—National Bronze
Ti-6Al-4V113.8440.342ASM data sheet
Float glass70—0.2AGC Planibel
Concrete C30/3733—0.2EN 1992-1-1

Fatigue safety factor calculator (Goodman, Gerber, Soderberg)

Endurance limit (Shigley eqs. 6-8 and 6-18):

S_e' = 0.5 S_ut  (S_ut ≤ 1 400 MPa),  700 MPa above
S_e = k_a k_b k_c k_d k_e k_f S_e'

Marin factors:

k_a = a S_ut^b: ground 1.58, −0.085; machined or cold-drawn 4.51, −0.265; hot-rolled 57.7, −0.718; as-forged 272, −0.995 (S_ut in MPa)
k_b = (d/7.62)^−0.107 (2.79 to 51 mm),  1.51 d^−0.157 (51 to 254 mm),  1 for axial load
k_c = 1 bending, 0.85 axial, 0.59 torsion
k_d = 0.975 + 0.432e-3 T − 0.115e-5 T² + 0.104e-8 T³ − 0.595e-12 T⁴  (T in °F)
k_e = 1, 0.897, 0.868, 0.814, 0.753 for 50, 90, 95, 99, 99.9 % reliability

Factors of safety for alternating stress σ_a and mean stress σ_m:

Goodman:       1/n = σ_a/S_e + σ_m/S_ut
Soderberg:     1/n = σ_a/S_e + σ_m/S_y
Gerber:        n = ½ (S_ut/σ_m)² (σ_a/S_e) [−1 + √(1 + (2 σ_m S_e / (S_ut σ_a))²)]
ASME-elliptic: n = 1 / √((σ_a/S_e)² + (σ_m/S_y)²)
Langer yield:  n_y = S_y / (σ_a + σ_m)
  • σ_a, σ_m — alternating and mean stresses, each multiplied by K_f
  • S_ut, S_y — ultimate and yield strength; d — diameter of a round section

Hardness conversion calculator (HRC, HRB, HV, HB)

Hardness to hardness, by linear interpolation between two rows of ASTM E140:

y = y₁ + (x − x₁) (y₂ − y₁) / (x₂ − x₁)
  • x — the reading you have; x₁, x₂ — the table rows either side of it
  • y₁, y₂ — the values of the other scale in those rows

Tables used:

RangeTableColumns
HRC 20 to 68ASTM E140 Table 1HRC, HV, HBW (carbide ball, 3 000 kgf)
HRB 55 to 100ASTM E140 Table 2HRB, HV, HB (equal to HV in this range)
HV 80 to 650ISO 18265 Table A.1HV, tensile strength Rm 255 to 2 180 MPa

The Vickers number links the tables: every reading is first converted to HV, then to the other scales and to the tensile strength.

Material properties table (steel, aluminium, plastics)

Values derived from the table:

m = ρ V
specific stiffness = E / ρ
specific strength = f / ρ
  • ρ — density; V — volume; E — Young's modulus
  • f — yield or 0.2 % proof strength, or the tensile or characteristic strength where there is no yield

Main values held (the calculator shows the thermal properties and the basis of each value):

Materialρ (kg/m³)E (GPa)Yield (MPa)Tensile (MPa)α (µm/(m·K))
S235, t ≤ 40 mm7 85021023536012.0
S355, t ≤ 40 mm7 85021035549012.0
ASTM A367 85020024840011.7
ASTM A572 Grade 507 85020034544811.7
Stainless 3048 03019320551516.9
Stainless 3168 03019320551516.0
Aluminium 6061-T62 7006927631023.6
Aluminium 6082-T62 7007026031023.0
Aluminium 5083-O2 7007012527523.0
Copper C110008 9101176922116.9
Brass C260008 53011010332420.0
Titanium Grade 24 5101052753448.6
Ti-6Al-4V4 4301148288958.6
Grey iron EN-GJL-2507 200103—250—
Concrete C30/372 40033—2.910.0
Timber C2442011—14.5—
Float glass2 50070—459.0
PVC-U1 4403.055—75
HDPE9501.123—180
Nylon PA661 1402.4838581

Mohr's circle calculator (principal stress, von Mises)

C = (σx + σy) / 2,    R = √( ((σx − σy)/2)² + τxy² )
σ1, σ2 = C ± R,    θp = ½ atan2(2 τxy, σx − σy)

Stresses on a plane rotated by θ:

σx' = C + (σx − σy)/2 · cos 2θ + τxy sin 2θ
τx'y' = −(σx − σy)/2 · sin 2θ + τxy cos 2θ
σy' = σx + σy − σx'

Equivalent stresses and factors of safety, with σ3 = 0:

σ' = √(σx² − σx σy + σy² + 3 τxy²)    (von Mises)
σ_T = max(|σ1 − σ2|, |σ1|, |σ2|)      (Tresca)
n = S_y / σ'   or   n = S_y / σ_T
  • σx, σy — normal stresses, tension positive; τxy — shear stress
  • θ, θp — angles from the x axis, counter-clockwise positive
  • R — maximum in-plane shear; S_y — yield strength

Pipe wall thickness (ASME B31.3)

t = P D / (2 (S E W + P Y))          B31.3 eq. (3a), valid for t < D/6 and P/(S E) ≤ 0.385
t_m = t + c                           c = corrosion/erosion + mechanical (thread, groove) allowance
t_nom ≥ t_m / (1 − mill tolerance)   12.5 % for ASTM A106/A53/A312 (A530)
t_eff = t_avail (1 − tol) − c,   MAWP = 2 S E W t_eff / (D − 2 Y t_eff),   σ_hoop = P D / (2 t_eff)

Y (Table 304.1.1): ferritic 0.4 to 482 °C, 0.5 to 510 °C, 0.7 above; austenitic 0.4 to 566 °C, 0.5 to 593 °C, 0.7 above; cast iron 0. E: seamless 1.0, ERW 0.85, EFW single 0.80 / double spot-radiographed 0.90, furnace butt 0.60.

Stress and strain calculator (Young's modulus)

σ = F / A
ε = ΔL / L
σ = E ε
ΔL = F L / (A E)
k = E A / L
  • F — axial force; A — cross-section area, π d²/4 for a round bar
  • L — original length; ΔL — elongation (shortening in compression)
  • E — Young's modulus; σ — normal stress; ε — strain
  • k — axial stiffness of the bar, force per unit of elongation

Each solve mode rearranges the same relations. For an allowable stress, A = F / σ_allow.

Thin-wall pressure vessel

Thin-wall membrane stresses (inside radius R, wall t, gauge pressure p):

Cylinder:  σ_hoop = p R / t,     σ_long = p R / (2 t)
Sphere:    σ = p R / (2 t)
Valid for t ≤ R/10 (error ≈ t/2R)

Lamé thick-wall maximum hoop stress at the inner surface (r_i = R, r_o = R + t):

Cylinder:  σ_max = p (r_o² + r_i²) / (r_o² − r_i²)
Sphere:    σ_max = p (r_o³ + 2 r_i³) / (2 (r_o³ − r_i³))

ASME Section VIII Division 1, UG-27 (S allowable stress, E joint efficiency, c corrosion allowance):

Cylinder:  t_req = p R / (S E − 0.6 p) + c,      MAWP = S E (t − c) / (R + 0.6 (t − c))
Sphere:    t_req = p R / (2 S E − 0.2 p) + c,    MAWP = 2 S E (t − c) / (R + 0.2 (t − c))
Limits:    t ≤ R/2;  p ≤ 0.385 S E (cylinder), p ≤ 0.665 S E (sphere)

Axial load on each head:

F = p π R²

Joint efficiencies (UW-12): 1.00 full radiography or seamless, 0.85 spot radiography, 0.70 no radiography.

Fasteners, fits and tolerances

Bolt torque and preload

Thread geometry (ISO 68-1, coarse pitch P, nominal diameter d):

d₂ = d − 0.6495 P        pitch diameter
d₃ = d − 1.2269 P        minor diameter
d_s = (d₂ + d₃) / 2
A_s = π d_s² / 4          tensile stress area

Proof load (ISO 898-1):

F_p = S_p × A_s

Assembly preload at 90 % yield under combined stress (VDI 2230 eq. R8/1):

F_M = A_s × 0.9 R_p0.2 / √( 1 + 3 [ (3/2)(d₂/d_s)( P/(π d₂) + 1.155 μ_G ) ]² )

Tightening torque (VDI 2230 eq. R8/4):

M_G = F_M (0.16 P + 0.58 d₂ μ_G)          thread torque
M_K = F_M μ_K D_Km / 2                     under-head friction torque
M_A = M_G + M_K
D_Km = (d_w + d_h) / 2                     mean bearing diameter: head bearing OD and hole diameter

Stresses during tightening:

σ = F_M / A_s,   τ = M_G / (π d_s³ / 12),   σ_red = √(σ² + 3 τ²)

Equivalent nut factor and the rule of thumb:

K = M_A / (F_M d)        (≈ 0.20 for μ_G = μ_K = 0.15, Shigley)
T₀.₂ = 0.2 F_M d

Minimum preload after scatter:

F_M,min = F_M / α_A      α_A 1.6–2.0 for a standard torque wrench
  • μ_G, μ_K — thread and under-head friction coefficients; R_p0.2 — yield or 0.2 % proof strength; S_p — ISO 898-1 proof stress

Interference fit

Contact pressure:   p = δ / (d [ (1/E_o)((D_o² + d²)/(D_o² − d²) + ν_o) + (1/E_i)((d² + d_i²)/(d² − d_i²) − ν_i) ])
Equal materials:    p = E δ (D_o² − d²)(d² − d_i²) / (2 d³ (D_o² − d_i²))
Torque:             T = μ p π d² L / 2
Axial force:        F = μ p π d L
Hub at the bore:    σ_t = p (D_o² + d²)/(D_o² − d²),   σ_r = −p
Heating:            ΔT = (δ + clearance) / (α d)
  • δ — diametral interference; d — fit diameter; D_o — hub outer diameter; d_i — shaft bore; L — fit length; μ — friction coefficient.

Lifting sling and wire rope load

Leg angle from geometry (two legs, or the diagonal of four):

sin β = (spread / 2) / leg length

Loads:

Hook load   F = W g × DAF
Leg tension T = F / (n_eff cos β)
Compression on the load per leg = T sin β
Angle factor = 1 / cos β

Working load limits (single leg, straight pull):

Grade 8 chain:  WLL ≈ 0.0314 d² tonnes (d in mm)                           EN 818-4
Wire rope 6×36 IWRC 1770 MPa: MBL = 0.356 d² × 1770 / 1000 kN;  WLL = MBL × 0.9 / 5   EN 12385-4, EN 13414-1
Rated sling: tag value

Capacity and utilisation:

Leg capacity = WLL × hitch factor   (straight 1.0, choke 0.8, basket with vertical legs 2.0)
Utilisation  = T / (leg capacity × g)
Maximum load W_max = leg capacity × g × n_eff cos β / (g × DAF)
  • W — load mass; DAF — dynamic amplification factor; n_eff — legs assumed to carry the load (all for 1–2 legs, 3 for 3–4 legs by default); β — angle of each leg to the vertical

Spring rate calculator (helical compression spring)

Geometry and rate:

D = OD − d,   C = D/d   (keep 4 ≤ C ≤ 12)
N_t = N_a + 0 / 1 / 2 / 2   (plain, plain-ground, squared, squared-ground)
L_s = d(N_t + 1), d N_t, d(N_t + 1), d N_t   (same order)
k = d⁴ G / (8 D³ N_a),   y = F/k,   F_s = k (L₀ − L_s)

Stress and strength:

τ = K 8 F D / (π d³),   K_B = (4C + 2)/(4C − 3)  or  K_W = (4C − 1)/(4C − 4) + 0.615/C
S_ut = A / d^m   (music wire 2211 MPa·mm^m, m 0.145; hard-drawn 1783/0.190; oil-tempered 1855/0.187; Cr-V 2005/0.168; Cr-Si 1974/0.108; stainless 302 1867/0.146)
S_sy = 0.45 S_ut (music wire, hard-drawn), 0.50 S_ut (hardened and tempered alloys), 0.35 S_ut (stainless)
n_s = S_sy / τ   (≥ 1.2 at solid height recommended)

Stability and dynamics:

stable if L₀ < 2.63 D / α   (α 0.5 fixed–fixed, 0.707, 1.0 hinged, 2.0 fixed–free)
f = ½ √(k/m),   m = ρ (π d²/4) π D N_a

Tolerance stack-up

Mid-tolerance value:   mean = nominal + (plus − minus)/2,   half-width h = (plus + minus)/2
Gap:                   Σ sign × mean
Worst case:            ± Σ h
Root sum of squares:   ± √(Σ h²)
Standard deviation:    σ = √(Σ σ_i²),   σ_i = h/z (normal) or h/√3 (uniform)
Capability:            Cpk = min(USL − μ, μ − LSL) / 3σ

Wire rope weight calculator

Mass per length (EN 12385-4):

m' = W × d² / 100          kg/m, d in mm

Weight of a length, or the length from a weight:

M = m' × L        L = M / m'

Mass in water:

m'_w = m' × (1 − ρ_w / 7 850)

Minimum breaking force and the share taken by the hanging rope:

MBL = K × d² × R_r / 1 000          kN, R_r in N/mm²
share = m' × g × L / MBL
  • W — nominal length mass factor, kg per 100 m per mm²: 0.359 for 6×19 fibre core, 0.400 for 6×19 steel core, 0.409 for 6×36 steel core
  • K — minimum breaking force factor: 0.330 fibre core, 0.356 steel core for the 6×19 and 6×36 classes
  • ρ_w — 1 025 kg/m³ for seawater, 1 000 kg/m³ for fresh water
  • R_r — rope grade, 1770, 1960 or 2160 N/mm²

Shafts, drives and power transmission

Belt and pulley calculator (ratio, rpm, belt length)

Speeds:

i = d₂ / d₁,    n₂ = n₁ d₁ / d₂ × (1 − s),    v = π d₁ n₁

Open belt, with D the larger and d the smaller diameter:

φ = asin((D − d) / (2C))
θ_d = π − 2φ,    θ_D = π + 2φ
L = √(4C² − (D − d)²) + ½ (D θ_D + d θ_d)

Crossed belt:

θ = π + 2 asin((D + d) / (2C))
L = √(4C² − (D + d)²) + ½ (D + d) θ
  • d₁, n₁ — driver diameter and speed; d₂, n₂ — driven diameter and speed
  • C — centre distance; s — slip; v — belt speed
  • θ — wrap angle in radians; L — belt length on the pitch line

Chain and sprocket calculator (roller chain length)

Sprocket pitch diameter and chain speed:

D = p / sin(180° / N)
V = N₁ p n₁

Chain length in pitches for a centre distance C (Shigley eq. 17-27):

L/p = 2C/p + (N₁ + N₂)/2 + (N₂ − N₁)² / (4π² C/p)

Centre distance for a chain of L/p pitches (eq. 17-28):

A = (N₁ + N₂)/2 − L/p
C = (p/4) [−A + √(A² − 8 ((N₂ − N₁) / (2π))²)]

Chordal speed variation:

ΔV/V = (π/N) [1/sin(180°/N) − 1/tan(180°/N)]
  • p — chain pitch; N₁, N₂ — teeth on the driver and driven sprockets
  • n₁ — driver speed; L — chain length; C — centre distance

Flywheel energy calculator (inertia and speed fluctuation)

E = ½ I ω²
ΔE = E₂ − E₁ = ½ I (ω₂² − ω₁²)
C_s = (ω₂ − ω₁) / ω,    ω = (ω₁ + ω₂) / 2
ΔE = C_s I ω²    so    I = ΔE / (C_s ω²)

Mass for a radius r, and stress at the mean speed (v = ω r):

solid disc:  m = 2 I / r²,   t = m / (ρ π r²),   σ_centre = (3 + ν)/8 · ρ v²
thin rim:    m = I / r²,     σ_hoop = ρ v²
  • I — moment of inertia; ω₁, ω₂ — lowest and highest speed in the cycle; ω — mean speed
  • ΔE — energy swing, the largest change of energy over a cycle from the torque–angle diagram
  • C_s — coefficient of speed fluctuation; ρ — density; ν = 0.3; t — disc thickness

Gear ratio, rpm and torque

Ratio, as input speed over output speed:

one stage:   i = z₂ / z₁
two stages:  i = (z₂ / z₁) × (z₄ / z₃)

Output speed, torque and power, with efficiency η per stage and k stages:

n_out = n_in / i
T_out = T_in × i × ηᵏ
P_out = P_in × ηᵏ,   P_in = 2π n_in T_in / 60
  • z₁, z₃ — teeth on the driving gears; z₂, z₄ — teeth on the driven gears
  • n — speed, rpm; T — torque, N·m
  • η — efficiency per stage (spur or helical 0.97 to 0.99, worm 0.5 to 0.9)

Mass moment of inertia calculator

Moments of inertia of homogeneous solids of mass m:

solid cylinder or disc, about its axis:      I = m r² / 2
solid cylinder, transverse axis at centre:  I = m (3 r² + L²) / 12
hollow cylinder, about its axis:            I = m (r_o² + r_i²) / 2
solid sphere:                               I = 2/5 m r²
thin spherical shell:                       I = 2/3 m r²
slender rod, about centre / end:            I = m L² / 12,  m L² / 3
rectangular block, normal to face a × b:    I = m (a² + b²) / 12

Parallel axis, radius of gyration and kinetic energy:

I_O = I_G + m d²,   k = √(I / m),   E = ½ I ω²,   ω = 2π n / 60
  • r — radius; L — length; d — distance between the parallel axes
  • n — speed in rpm; ω — angular speed in rad/s

Mechanical advantage calculator (lever, pulley, screw jack)

Ideal mechanical advantage (distance ratio) and actual mechanical advantage:

AMA = W / F,    efficiency η = AMA / IMA

Lever, pulley block, wheel and axle:

lever:   IMA = a_e / a_l,   F = W a_l / a_e
pulley:  IMA = n,           F = W / (η n)
winch:   IMA = R / r,       F = W / (η R / r)

Inclined plane, effort along the slope:

IMA = 1 / sin θ,    F = W (sin θ + μ cos θ)

Screw jack (Shigley eqs. 8-1, 8-5, 8-6):

T_R = (W d_m / 2) (l + π μ d_m sec α) / (π d_m − μ l sec α) + W μ_c d_c / 2
T_L = (W d_m / 2) (π μ d_m sec α − l) / (π d_m + μ l sec α) + W μ_c d_c / 2
IMA = 2π R / l,    F = T_R / R
  • W — load; F — effort; a_e, a_l — effort and load arms from the fulcrum
  • n — rope parts supporting the moving block; R, r — wheel and axle radii
  • θ — slope angle; μ — friction coefficient on the slope or thread
  • d_m — mean thread diameter; l — lead; α — thread flank half-angle (0° square, 14.5° Acme)
  • μ_c, d_c — collar friction and mean collar diameter; R — handle radius for the screw jack

Rolling bearing L10 life (ISO 281)

P = X F_r + Y F_a   (F_a/F_r > e; otherwise P = F_r),  then × application factor
L10 = (C/P)^p   million revolutions,  p = 3 (ball), 10/3 (roller)
L10h = 10⁶ L10 / (60 n)
Lnm = a₁ a_ISO L10,   years = Lnmh / (hours per year)
required C for a life L (h): C = P (60 n L / (10⁶ a₁ a_ISO))^(1/p)
static safety s0 = C0 / P

a₁ (ISO 281:2007 Table 1): 90 % 1.00, 95 % 0.64, 96 % 0.55, 97 % 0.47, 98 % 0.37, 99 % 0.25, 99.9 % 0.093, 99.95 % 0.077.

Shaft critical speed calculator (Rayleigh and Dunkerley)

Static deflection by superposition, with the influence coefficient of a simply supported span (load at a, b = L − a):

δ(x, a) = b x (L² − b² − x²) / (6 E I L)          for x ≤ a
δ(x, a) = a (L − x)(2 L x − x² − a²) / (6 E I L)   for x > a
y_j = Σ W_i δ(x_j, a_i)

Rayleigh's method (Shigley eq. 7-23) and the uniform shaft (eq. 7-22):

ω_R = √( g Σ W_i y_i / Σ W_i y_i² )
ω_s = (π / L)² √( E I / (ρ A) )

Dunkerley's rule (eq. 7-32), used to combine:

1/ω² = 1/ω_R² + 1/ω_s²
pure Dunkerley: 1/ω² = Σ m_i δ_ii
  • W_i = m_i g — weight of mass i at distance a_i from the left bearing; L — bearing span
  • E — Young's modulus; I = π (d⁴ − d_i⁴)/64; A — section area; ρ — shaft density
  • n = 60 ω / (2π) in rpm

Shaft torque, power and diameter

Torque from power:

T = P / ω = P / (2π n / 60) = 9 549.3 × P[kW] / n[rpm]      [N·m]

Torsion of a circular shaft (outer diameter d_o, bore d_i, q = d_i/d_o):

J = π (d_o⁴ − d_i⁴) / 32
τ_max = T (d_o/2) / J = 16 T / (π d_o³ (1 − q⁴))
θ = T L / (G J)                                             (radians)

Required outer diameter for an allowable shear stress τ_allow at the same bore ratio:

d_o = [ 16 T / (π τ_allow (1 − q⁴)) ]^(1/3)

Combined steady bending M and torsion T:

T_e = √(M² + T²)            equivalent torque (maximum shear stress theory): τ_max = 16 T_e / (π d³ (1 − q⁴))
M_e = (M + T_e) / 2         equivalent moment (maximum principal stress theory): σ_max = 32 M_e / (π d³ (1 − q⁴))

IACS UR M68 minimum diameter (P in kW, n in rpm, σ_B in N/mm², d in mm):

d = F k [ P / (n (1 − q⁴)) × 560 / (σ_B + 160) ]^(1/3)
  • F = 95 for intermediate shafts in turbine, electric or slip-coupling installations; 100 for other diesel installations and all propeller shafts
  • k = 1.00 plain intermediate shaft; 1.10 keyway or transverse hole; 1.20 longitudinal slot; 1.22 propeller shaft, keyless or flanged, oil-lubricated; 1.26 propeller shaft with keyed propeller or water-lubricated bearing
  • σ_B is capped by the rule: 600 N/mm² for carbon and carbon-manganese steel and for propeller shafts, 800 N/mm² for alloy-steel intermediate shafts

Shaft torsion calculator (shear stress, twist, diameter)

J = π (d_o⁴ − d_i⁴) / 32
τ = T r / J = 16 T / (π d_o³ (1 − k⁴)),    k = d_i / d_o
θ = T L / (G J)
T = P / ω = 9 549 P[kW] / n[rpm]    N·m

Allowable torque and required diameter:

T_τ = τ_allow J / r,    T_θ = θ_allow G J / L
d_τ = [16 T / (π τ_allow (1 − k⁴))]^(1/3)
d_θ = [32 T L / (π G θ_allow (1 − k⁴))]^(1/4)
  • T — torque; d_o, d_i — outside and inside diameters; r = d_o/2
  • L — length between the torques; G — shear modulus (81 GPa for steel, 27 GPa for aluminium)
  • θ — angle of twist in radians; τ_allow, θ_allow — the limits you set

Torque, power and speed

Power, torque and angular velocity:

P = T × ω,   ω = 2π × n / 60

Solved for each quantity:

T = 60 P / (2π n)
P = 2π n T / 60
n = 60 P / (2π T)

In imperial units, with T in lbf·ft and n in rpm:

hp = T × n / 5252
  • P — power, W (1 kW = 1.341 hp)
  • T — torque, N·m (1 N·m = 0.7376 lbf·ft)
  • n — speed, rpm; ω — angular velocity, rad/s

V-belt length and centre distance calculator

Approximate pitch length (Shigley eq. 17-16a):

L_p = 2C + π (D + d) / 2 + (D − d)² / (4C)

Centre distance for a pitch length (eq. 17-16b):

C = ¼ { [L_p − π (D + d)/2] + √( [L_p − π (D + d)/2]² − 2 (D − d)² ) }

Exact open-belt length (eq. 17-1), used as the check:

φ = asin((D − d) / (2C))
L = √(4C² − (D − d)²) + ½ [D (π + 2φ) + d (π − 2φ)]
  • D, d — pitch diameters of the large and small sheaves
  • C — centre distance; L_p — belt pitch length
  • Wrap on the small sheave: θ = π − 2φ

Engines, hydraulics and plant

Engine BMEP, torque and power

V_d = (π/4) D² S   per cylinder,   V_d,tot = n_cyl V_d
P = p_me V_d,tot N / (60 n_R)          n_R = 2 (four-stroke), 1 (two-stroke)
T = 60 P / (2π N),   c_m = 2 S N / 60
IMEP = BMEP / η_m,   FMEP = IMEP − BMEP
specific power = P / V_d,tot,   work per cycle per cylinder = p_me V_d

Typical ranges: large two-strokes 18–21 bar and 8–9 m/s; medium-speed four-strokes 22–28 bar and 9–11 m/s; high-speed engines up to 14 m/s.

Engine power and SFOC to ISO 3046 conditions

k = [(p_x − a φ_x p_sx)/(p_r − a φ_r p_sr)]^m (T_r/T_x)^n (T_cr/T_cx)^s     ISO 3046-1 (3), T in K
α = k − 0.7 (1 − k)(1/η_m − 1),   P_x = α P_r                                 (2), (1)
β = k/α,   b_x = β b_r                                                         clause 10.4
b_fuel = b_x × 42 700 / LCV                                                     equal energy per kWh

Table 2 (a, m, n, s): A 1, 1, 0.75, 0 · B 0, 1, 1, 0 · C 0, 0.7, 2, 0 · D 0, 0.7, 1.2, 1 · F and J 0, 0.57, 0.55, 1.75 · G 0, 0.7, 1.2, 1 · I 1, 0.86, 0.55, 0. Reference conditions: 100 kPa, 298 K, 30 %, 298 K.

Hydraulic cylinder force and speed

Areas (bore D, rod d):

A_cap = π D² / 4,   A_rod = π d² / 4,   A_ann = A_cap − A_rod,   φ = A_cap / A_ann

Forces (effective differential pressure p, mechanical efficiency η):

F_push = p A_cap η,   F_pull = p A_ann η

Speeds and times (pump flow Q, stroke s):

v_extend = Q / A_cap,   v_retract = Q / A_ann,   t = s / v
Return flow while extending = Q × A_ann / A_cap

Regenerative extension (annulus connected to the cap side):

v_regen = Q / A_rod,   F_regen = p A_rod η

Power and volumes:

P_hyd = p Q,   V_extend = A_cap s,   V_retract = A_ann s

Rod buckling (Euler, rod alone at full extension, mounting factor K):

I = π d⁴ / 64,   P_cr = π² E I / (K s)²,   safety factor = P_cr / F_push
s_max = √(π² E I / (FS × F_push)) / K

K: both ends pivoted with guided rod 1.0; cylinder fixed, rod end guided 0.7; cylinder fixed, rod end pivoted and guided 1.0; cylinder fixed, rod end free 2.0.

Tank volume and partial fill

Horizontal cylinder (radius R, cylindrical length L, level h from the bottom):

A(h) = R² acos((R − h)/R) − (R − h) √(2Rh − h²)       circular segment
c(h) = 2 √(2Rh − h²)                                   chord (free-surface breadth)
V = A L                                                flat ends
V = A L + π h² (3R − h) / 3                            two hemispherical heads (the heads form a sphere)

Sphere (radius R):

V = π h² (3R − h) / 3

Vertical cylinder and rectangular tank (length l, breadth b):

V = π R² h,          V = l b h

Mass and free surface:

m = ρ V
i = L c³ / 12   (rectangular surface L × c),   i = π r⁴ / 4   (circular surface of radius r)
Free surface moment = i ρ          (reduces GM by i ρ / Δ)

Level for a target volume: solved by bisection on V(h).

Vibration isolation and severity

Natural frequency:   f_n = (1/2π) √(k/m) = (1/2π) √(g/δ_st)
Frequency ratio:     r = f / f_n,   f = order × rpm / 60
Transmissibility:    T = √((1 + (2ζr)²) / ((1 − r²)² + (2ζr)²))
Isolation:           1 − T,   20 log10(1/T) dB
  • k — total mount stiffness; m — mass on the mounts; ζ — damping ratio; δ_st — static deflection.

Results are estimates. They do not replace the governing code, class or flag requirements, or a check by a competent person.